TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
Brand Name:Hincn
Model Number:HCP2-4040
Minimum Order Quantity:1 pc
Delivery Time:7~14 working days
Payment Terms:,T/T,Western Union,MoneyGram,D/P,D/A,L/C
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Address:
14/F, The Belgian Bank Building, No. 721-725 Nathan Road, Mongkok, Kowloon, Hongkong,China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
TDD COFDM 2W 5W 10W 1.4GHz 1.5GHz Band Bidirectional RF Power
Amplifier Module
Brief Introdcution:
Time-division frequency-sharing networking with low-noise
amplifier, 2W, 5W, 10W digital power amplifier modules. Size is
40*40*12mm, suitable for connecting with our TDD wireless video
data transmitter to increase power and achieve long-distance
transmission.
Specifications:
- Model number: HCP2-4040
- Product name:TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
- High linearity
- Frequency range:1420~1530MHz or other frequencies
- Gain: ≥17dB±1dB@28V or 12dB@12V
- Shoulder ratio:≥40dB@2.0W@28V, ≥31dB@5W@28V, ≥20dB@10W@28V (DVB-T 2/ 8K mode modulation signal, Deviation from the center frequency 4.3MHz);
- In-band fluctuations:≤ ±1dB (typical value±0.5dB)
- Input/ output interface:SMA or MCX, IPEX for bare board.
- Maximum input power: 30dBm
- Third order intermodulation: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V
- ACPR: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V(Test in the ±4.3 MHz range outside the frequency band )
- Harmonic suppression: ≥-30dBc@ Pout=33~40dBm@28V
- Input VSWR: ≤2 (load 50Ω)/ Output standing wave ratio: ≤1.5 (load 50Ω)
- Relative group delay:≤20ns
- RF switch switching time: turn on time≤1us / switch off time ≤0.2us
- Power amplifier transmit-receive isolation degree:≥40dB
- Receive gain:2~3dB ( or 10-13dB,with internal low-noise amplifier), or 10dB@10~50MHz narrowband bandwidth with built-in acoustic wave filter
- Control level: TTL level, 1.8～5V (high capability, or customized
version: Automatic detection of transmission input exceeding 15 dBm
enables automatic transmission and reception modes. EN 1: Power
amplifier is in transmitting mode,but receiving is off.
EN 0: Receiving status, but transmitting is off (power amplifier static current is less than 0.15A)
Working temperature:-25~+85℃
Supply voltage: 12~28V
Working current: 28V/0.65A@2W, 28V/0.85A@5W, 28V/1.3A@10W
Volume: size with housing 40*40*12mm/ bare board size: 32.6*32.6*5mm
High linearity, extremely high reliability, no damage to the power amplifier in case of open circuit, short circuit or system self-excitation.
Power amplifier Out put 2W spectrogram
Power amplifier Output 2W constellation diagrams and error rates,etc
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
Inquiry Cart
0