CNC Controlled Mesh Wire Making Machine Light Duty BWR1600B Wire Mesh Loom Machine
Brand Name:APBWR
Certification:ISO9001
Model Number:BWR130B-1RF
Minimum Order Quantity:1 UNIT
Delivery Time:14-21DAYS
Payment Terms:L/C,T/T
Contact Now
Add to Cart
Verified Supplier
Address:
NO.28,1st latitude road,East district, industrial Park,Anping
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Efficient CNC Controlled Light Duty Metal Wire Mesh Loom BWR1600B
1. Light Duty Metal Wire Mesh Loom Introduction
The BWR1600B is a light-duty, CNC-controlled wire mesh loom built
on a rigid 1,600 mm chassis for stable, repeatable production. An
industrial PLC with servo drives precisely coordinates warp
let-off, beat-up, and take-up, while closed-loop tension control
keeps aperture and density within tight tolerances. Mesh count and
tension are digitally set and stored via the touch HMI, enabling
fast, recipe-based changeovers and consistent quality across
shifts. Typical capability (project-dependent): plain weave ~30–500
mesh/inch with fine wire handling down to ~Ø 0.01–0.20 mm; supports
plain, twill, and Dutch weaves for broader process coverage.
2. Light Duty Metal Wire Mesh Loom Application Scenarios
Designed for precision and fine-wire work, the BWR1600B excels in
filtration media, laboratory and pilot-line meshes, electronics and
battery screens, catalyst support cloth, and architectural
protection panels where flatness, clean selvedges, and dimensional
consistency matter. Plants running multi-SKU programs benefit from
quick spec switches and stable long runs, while OEMs and converters
can integrate optional uncoiling, pre-straightening, cutting,
edge-handling, and take-up modules to match downstream processes
and target takt times.
3. Light Duty Metal Wire Mesh Loom Key Advantages
Engineered for uptime and ease of use, the BWR1600B combines servo
synchronization with closed-loop tension to deliver stable geometry
and smooth surfaces at speed. Recipe governance reduces operator
variability and shortens setup time, lifting OEE and first-pass
yield. A reinforced frame minimizes vibration, while
service-friendly access and standardized wear parts simplify
maintenance and lower total cost per square meter of mesh.
ERP-ready order/BOM linkage (if enabled) provides progress
visibility and material/batch traceability for audited production.
4. Light Duty Metal Wire Mesh Loom Parameter:
Feature Category | Light-duty Loom (Model B) | Heavy-duty Loom (Model D) | |
Mesh Width | 1300mm 1600mm | 1300mm 1600mm | |
Harness System | Positive (Overhead) | Negative (Bottom Cam) | |
Web Removal Method / Doffing Method | Continuous Web Removal or Direct Winding | Continuous Web Removal or Direct Winding | |
Wire Diameter Range | Continuous Web Removal | 0.01 - 0.2 mm | 0.1 - 0.6 mm |
Direct Winding | 0.03 - 0.2 mm | 0.1 - 0.3 mm | |
Mesh Count Range | Plain Weave | 30 - 500 mesh/inch | 10 - 100 mesh/inch |
Twill Weave | 30 - 635 mesh/inch | 20 - 100 mesh/inch | |
Dutch Weave | 100 - 2300 mesh/inch | 30 - 500 mesh/inch | |
Beating-Up Frequency | Max. 120 r/h | Max. 100 r/h | |
Motor Power | 2.2kw | 2.2kw | |
Standard Configuration | Crankshaft Type | Bushing Type | |
Side Frames | Casting Wall Plates | ||
Tension System | Tension Sensor | ||
Rapier Head Type | Carbon Fiber | ||
Drive Type | Fully Digital Control (CNC) | ||
6. Light Duty Metal Wire Mesh Loom Detailed Images:
CNC Controlled Mesh Wire Making Machine Light Duty BWR1600B Wire Mesh Loom Machine
Inquiry Cart
0