Ev Battery Temperature Sensor For Battery Covers And Power Distribution

Ev Battery Temperature Sensor For Battery Covers And Power Distribution

Brief Instruction:

The item is EV battery temperature sensor. It’s suitable for surface temperature measurement. Typical application include battery control system in EV car. EV battery temperature sensor consists of an NTC chip thermistor mounted in an eyelet tag (ring lug), with insulated flexible wire (XLPE insulated wire UL4411 125℃ & UL4413 150℃)and terminals. One standard resistance value and beta value: R25℃= 10kΩ and B25/85=3435k.

Features:

Comply for ROHS standard

Operating temperature range: -40℃~125℃(UL4411 22AWG)

Operating temperature range: -40℃~150℃(UL4413 22AWG)

Good and long-term stability

Sensing element electrically isolated from tag

Eyelets to fit M3, M4/M5 screw sizes

Application:

EV/HEV Bus Bars

Battery Covers

Power Distribution

Structure and Dimensions:

Detailed parameters:

Product picture:

​​

Standard packing (inner packing): 1pcs~100pcs/polybag

Operation Notice

1. Application:Temperature measure and control；　

2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3. Avoid excessive heat shock,The hot air blow should beat least 30mm to the probe in case heat shrink protection tube need to be attached.

4. Storage Temperature -10℃～40℃,≤75%RH；Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5. According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.

Hefei Jingpu Sensor Technology Co., Ltd. is a national high-tech enterprise integrating R&D, production, and sales of thermistors and temperature sensors which was established in 2014 and obtained IS09001 Certification in 2015, IS013485 Certification in 2018, CE Certification for medical products in 2019, and Medical Device License and Registration Certificate in 2020.

Our products include various epoxy-encapsulated and glass-encapsulated thermistors and various shell-encapsulated temperature sensors that are widely used in the medical industry (such as monitors, medical equipment, bacterial incubators, medical refrigerators, etc.), smart wearable devices, automobiles (such as water temperature, oil temperature, air conditioner, filter, intake pressure temperature, steering wheel, rearview mirror, tyre, battery pack, etc.), home appliances (such as air conditioner, refrigerator, electric water heater, induction cooker, electronic calendar, etc.), portable power bank, fire alarm, meteorology, ocean, etc.)

Our Duty: Attentively Do Every Temperature Sensor

Our Dream: To Be One of the Most Famous Sensor Manufacturer

Our Motto: To Benefit Others Is To Benefit Oneself