R25 10K B25/85 3435k NTC Epoxy Thermistor For UAV

R25 10K B25/85 3435k NTC Epoxy Thermistor For UAV

Brief Introduction:

MF5A-1( for UAV unmanned aerial vehicle)series epoxy-coated NTC Thermistor be manufactured from Hefei Jingpu Sensor Technology Co., Ltd. It’s composed of Copper clad steel lead wire, soldered NTC chip, and epoxy resin. The sensor feature: simple, functional, high accuracy. The optional resistance value range from 0.3kΩ to 2000kΩ, and the beta value range from 2500K to 4500K. These epoxy-coated NTC Thermistors be widely applied for home appliances, automotive, medical equipment, power tool, etc.

Features:

•Comply with RoHS standard

•R25=10KΩ±5%,B25/85=3435k±2%

•Operating temperature range: -40℃~125℃

•The thickness of the thin

Application:

• For UAV(unmanned aerial vehicle)

Structure and Dimensions:(unit: mm)

Standard packing (inner packing): 500pcs/polybag

Electrical Specification:

Operation Notice:

1. Application: Temperature measure and control；　

2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3. Avoid excessive heat shock, The hot air blow should beat at least 30mm to the probe in case a heat-shrink protection tube needs to be attached.

4. Storage Temperature -10℃～40℃,≤75%RH； Avoid a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5. According to the structure of the Glass coating NTC thermistor, when the end-user is installed, to avoid the epoxy head being subjected to too much tensile force and bending force from the lead wire, The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head. So as not to hurt the chip, resulting in resistance drifting and even open circuit, especially when the component is heated.

You may also like:

Hefei Jingpu Sensor Technology Co., Ltd. is a national high-tech enterprise integrating R&D, production, and sales of thermistors and temperature sensors which was established in 2014 and obtained IS09001 Certification in 2015, IS013485 Certification in 2018, CE Certification for medical products in 2019, and Medical Device License and Registration Certificate in 2020.

Our products include various epoxy-encapsulated and glass-encapsulated thermistors and various shell-encapsulated temperature sensors that are widely used in the medical industry (such as monitors, medical equipment, bacterial incubators, medical refrigerators, etc.), smart wearable devices, automobiles (such as water temperature, oil temperature, air conditioner, filter, intake pressure temperature, steering wheel, rearview mirror, tyre, battery pack, etc.), home appliances (such as air conditioner, refrigerator, electric water heater, induction cooker, electronic calendar, etc.), portable power bank, fire alarm, meteorology, ocean, etc.)

Our Duty: Attentively Do Every Temperature Sensor

Our Dream: To Be One of the Most Famous Sensor Manufacturer

Our Motto: To Benefit Others Is To Benefit Oneself