Mean Well MDR-10-5 Power Supply Din Rail 24vdc MDR-20 MDR-40 MDR-60

Brand Name:MEAN WELL
Certification:CE
Model Number:MDR-10-5
Minimum Order Quantity:1 piece
Delivery Time:8-10 weeks
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Beijing Beijing China
Address: No 803,Unit 3 ,DaDou Road, Huihao Building .Fangshan District,Beijing,China
Supplier`s last login times: within 36 hours
Product Details Company Profile
Product Details

Mean Well Brand MDR-10-5 DIN RAIL MDR-20 MDR-40 MDR-60 MDR-100


Mean Well MDR-10-5 DIN RAIL MDR-20 MDR-40 MDR-60 MDR-100


Features :

Plastic case, ultra slim

1∅, full range input

No load power consumption<0.75W~1W

Assemble on industrial rail TS-35 / 7.5 or 15

Built-in active PFC function

Class I, Div 2 Hazardous Locations T4 (MDR-40/60)


Technical


MODELMDR-10-5MDR-10-12MDR-10-15MDR-10-24

OUTPUT

DC VOLTAGE5V12V15V24V
RATED CURRENT2A0.84A0.67A0.42A
CURRENT RANGE0 ~ 2A0 ~ 0.84A0 ~ 0.67A0 ~ 0.42A
RATED POWER10W10W10W10W
RIPPLE & NOISE (max.) Note.280mVp-p120mVp-p120mVp-p150mVp-p
VOLTAGE TOLERANCE Note.3±5.0%±3.0%±3.0%±2.0%
LINE REGULATION±1.0%±1.0%±1.0%±1.0%
LOAD REGULATION±5.0%±3.0%±3.0%±2.0%
SETUP, RISE TIME Note.5500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)120ms/230VAC 25ms/115VAC at full load

INPUT

VOLTAGE RANGE85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)77%81%81%84%
AC CURRENT (Typ.)0.33A/115VAC 0.21A/230VAC
INRUSH CURRENT (Typ.)COLD START 35A/115VAC 70A/230VAC
LEAKAGE CURRENT<1mA / 240VAC

PROTECTION

OVERLOADAbove 105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V
Protection type : Shut down o/p voltage, re-power on to recover
FUNCTIONDC OK ACTIVE SIGNAL (max.)3.75 ~ 6V / 50mA9 ~ 13.5V / 40mA11.5 ~ 16.5V / 40mA18 ~ 27V / 20mA

ENVIRONMENT

WORKING TEMP.-20 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/℃ (0 ~ 50℃)
VIBRATIONComponent:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

SAFETY & EMC

(Note 4)

SAFETY STANDARDSUL508, TUV BS EN/EN62368-1, EAC TP TC 004, BSMI CNS14336-1, AS/NZS 62368.1 approved
WITHSTAND VOLTAGEI/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSIONCompliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class B
EMC IMMUNITYCompliance to BS EN/EN61000-4-2, 3, 4, 5, 6, 8, 11, BS EN/EN55024,BS EN/EN61000-6-1,BS EN/EN61204-3, light industry level, EAC TP TC 020

OTHERS

MTBF3334.7K hrs min. Telcordia SR-332 (Bellcore) ; 584.0K hrs min. MIL-HDBK-217F (25℃)
DIMENSION22.5*90*100mm (W*H*D)
PACKING0.15Kg; 72pcs/11.8Kg/1.04CUFT
NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets

EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on http://www.meanwell.com)

5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx










Solutions
We provide a complete solutions including site survey, propose professional plan according to customer’s request ,technical support, and maintenance service for Telecommunication Companies in and out of China. We have a competent team and a network of trusted Partners around the world.

FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios, load and full load and current sharing test to ensure the quality of the product.

2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The only difference is the price and schedule.

3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction document later to give you a more comprehensive and direct introduction to our company’s information.

4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent renewal of supply, flexible provided according to different to different needs of customers, providing different solutions.

5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and the freight needs to be borne by you.

6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It has already had a certain reputation. We will carefully analyze it. If it is indeed our quality problem, you can rest assured that it will do things according to the contract agreement and will never let you have any after the worries, our service team will be happy to serve you.

7 What about the quality ?
A:100% original with new package. we will test each item before posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad quality products within guarantee time.







China Mean Well MDR-10-5 Power Supply Din Rail 24vdc MDR-20 MDR-40 MDR-60 supplier

Mean Well MDR-10-5 Power Supply Din Rail 24vdc MDR-20 MDR-40 MDR-60

Inquiry Cart 0