Gold Ore iron ore cone Crushing machines, Mineral Processing Cs
Cone Crusher Equipment
Product Description
Symons cone crusher is widely used in the metallurgical industry,
construction materials industry, road building industry, chemical
industry and silicate industry. It is suitable to crush ores and
rocks with medium hardness and medium hardness above. It has
features of strong crushing force, reliable structure, high
efficiency, high capacity, low operating cost, easy adjustment,
economical to use and so on. Also symons cone crusher uses the
compensating lubricating grease sealing, it can avoid lubrication
oil being polluted by dust, so that all parts work reliably and
have a long operating life. The safety insurance system of cone
crusher uses several spring sets, so the matter and iron ore are
down from the crushing cavity and do not damage the crusher, simply
and reliably. The cone crusher has standard type and short head
type, the standard type is suitable to medium size and the short
head type for medium and fine crushing.
Working Principle:
Symons cone crusher mainly consists of frame part, transmission
part eccentric Ministry, the Ministry of bowl bearings, bearing
sleeve Ministry Ministry of adjustment sleeve, the spring part and
provide lubricant lubrication oil station and other components.
Symons cone crusher reasonable structural design, high production
efficiency.
Using the design of high precision bowl bearing reserves and
centralized lubrication systems and novel stem oil seals dust
control system. When you need to adjust the discharge opening size
can be adjusted by hand to promote the winch. The machine also has
a thing when it is not broken into the crushing chamber, spring
safety devices to protect equipment from damage characteristics.
When cone crusher work, motor drives the eccentric through the
pulley, drive shaft and a rotating set of gears, crushing cone axis
moving in force under the spin pendulum movement to do so crushing
wall of rolling acetabular wall sometimes close, sometimes far
away, ore crushing cavity constantly being squeezed and bent and
broken.
Features
Symons cone crusher features :
1. Larger capacity achieved by the design of larger crush throw
2. Setting of discharge opening is hydraulic drive
3. Grease seal reduces dust contamination effectively
4. Cavities of standard or short head are changeable through
different mantles and bowl liners
5. Hydraulic overload protection device helps to remove tramp iron
and reduce downtime
6. Thin oil lubrication station is outfitted with air_conditioning
cooling system for better cooling performance.
Specification
Symons cone crusher technology specfications:
Gold Ore iron ore cone Crushing machines, Mineral Processing Cs
Cone Crusher Equipment
Model | Movable Cone Diametermm (inch) | Chamber Style | Opening Side | Closed Side | Discharging Opening (mm) | REV (r/min) | Power (kw) | Machine Size (mm) |
Max.Feeding (mm) |
CSB75 | 900 (3′) | medium | 83 | 102 | 9-22 | 580 | 6-75 | 2821×1880 ×2164 |
coarse | 159 | 175 | 13-38 |
CSD75 | 914 (3′) | fine | 13 | 41 | 3-13 | 580 | 6-75 | 2821×1880 ×2410 |
medium | 33 | 60 | 3-16 |
coarse | 51 | 76 | 6-19 |
CSB160 | 1295 (4 1/4′) | fine | 109 | 137 | 13-31 | 485 | 6-185 | 2800×2342 ×2668 |
medium | 188 | 210 | 16-31 |
coarse | 216 | 241 | 19-51 |
CSD160 | 1295 (4 1/4′) | fine | 29 | 64 | 3-16 | 485 | 6-160 | 2800×2342 ×2668 |
medium | 54 | 89 | 6-16 |
coarse | 70 | 105 | 10-25 |
CSB240 | 1650 (5 1/2′) | fine | 188 | 209 | 16-38 | 485 | 6-240 | 3911×2870 ×3771 |
medium | 213 | 241 | 22-51 |
coarse | 241 | 268 | 25-64 |
CSD240 | 1650 (5 1/2′) | fine | 35 | 70 | 5-13 | 485 | 6-240 | 3917×2870 ×3771 |
medium | 54 | 89 | 6-19 |
coarse | 98 | 133 | 10-25 |
CSB400 | 2134 (7′) | fine | 253 | 278 | 19-38 | 435 | 6-400 | 5200×4300 ×4700 |
medium | 303 | 334 | 25-51 |
coarse | 334 | 369 | 31-64 |
CSD400 | 2134 (7′) | fine | 51 | 105 | 5-16 | 435 | 6-400 | 5200×4300 ×4700 |
medium | 95 | 133 | 10-19 |
coarse | 127 | 178 | 13-25 |
Questions & Answers
Questions & Answers:
Q1: How to choose the suitable model ?
A: Please confirm the following information :
1. what kind of stone do you want to crush ? Such as granite, iron
ore, riverstone, andesite, limestone ?
2. what's the size of your stone before crush ? how many inch or mm
? such as 500mm, 600mm...800mm
3. what's your requirements of final product size ? how many inch
or mm ? such as 0-5,5-10,10-20,20-30mm
4. what's your requirements of production capacity ? how many ton
per hour ? 100-150tph, 150-200tph, 200-300tph...
Q2. How long is the warranty? Does your company supply related
spare parts?
A: The crusher equipment is warranted for one year. And we provide
spare parts at reasonable price.
Q3: How long is the delivery time?
A: Generally it takes one week if the goods are in stock. Otherwise
it needs 15-20 days, and it also depends on the ordered quantity.