Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel
Brand Name:Aorun
Model Number:Aorun
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Anti Corrosion Acrylic Paint 1k Metallic Color Coating Waterproof Paint
Quick Detail:
| Name | Art resin 9422 | Usage | Appliance Paint, antirust paint |
| Type | BPA | Function | Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless |
Description:
A two-component coating composed of epoxy resin, asphalt, anti-rust pigment and curing agent.
FEATURES AND CHARACTERISTICS
Excellent water resistance and rust resistance,good chemical
resistance and oil resistance; and the paint film is tough, with
good adhesion, impact resistance and abrasion resistance, high
effective ingredients, thicker coating can be applied at one time,
airless spraying-dry film thickness can reach 150-200µm.
The paint film is tough and water-resistant. It has excellent adhesion, salt-resistant and anti-corrosion property and can resist chemicals Corrosion.
Storage notice:
Storage: this product should be stored in shady, dry, and ventilated warehouse and storage temperature 5-40℃ is appropriate. The shelf life is 12 months at room temperature. If exceeding shelf life, the products shall be tested before using.
Advantages:
1. Beautiful and shiny paint film;
2. Fast drying in normal temperature;
3. Good Weather Resistant and Color Retention
4. Excellent leveling property & Easy Application
Specification:
Items | Units/conditions | Technical Data |
Viscosity | Shore-D | 80-85 |
Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
Surface resistivity | 25℃/ Ω. | 2.6x1014 |
Dielectric strength | 25℃ KV/MM | 25 |
Coefficient of linear expansion | CM/K | <6.1x10-5 |
Glass transition temperature | ℃ | >90 |
Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A,
B components are strictly according to the weight ratio, accurately
weighed, and stirit evenly along the inner wall of the container
clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment,
to avoid waste. When the temperature is lower than 15 ° C, please
pre-heat the A glue to 30 ° C and then adjust the rubber, easy to
operate (low temperature, A glue will thicken ); After use must
seal the lid,to avoid the product due to moisture absorption
scrapped.
3. When the relative humidity is more than 85%, the surface of the
cured product can easily absorb the moisture in the air to form a
whitemist.Therefore,when the relative humidity is more than 85%, it
is not suitable for room temperature curing. It is recommended to
use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
NOTE:
1.The primer film must be ground, cleaned and dried before
spraying.(Wet abrading600#-800# , Dry abrading400#-600#)
2.When the temperature is higher than 30°C, the appropriate amount
of Butyl Cellosolve should be added when the thinner is used to
avoid floating with the silver powder paint.
3.Due to the high transparency of the metal paint, the requirements
for the spraying tool and technology are high. Otherwise, the metal
paint layer will have floating and weakly metallic feeling.
4.Metal paint spray film thickness should not exceed 25um.
Otherwise the adhesion between layers may not be strong.
5.Flash after every layer of metal paint is sprayed. If there are
dust spots or particles on the surface of the paint, wipe it off
with a tack cloth.
6.Spray varnish asap after spraying 1K-based paint for 10-15
minutes. If the time is too long, it will affect the adhesion.
FAQ:
Are you a manufacturer?
A: Yes.
What is your main production?
A:Our main paint production is included various type Floor
PaintFireproof PaintIndustria
Anti-corrosion Paint
What is your payment terms?
A: ByT/T.30%for depositand70%beforeshipment
ByLC100% irrevocable LC opened within two weeks aftercontract
signed
What is your delivery?
A:30~45working daysafter depositandproduction
specificationsconfirmed
Do you accept small order?
A:Due to paint is chemical goods it can't do bulk shipping We use
20and 40'containerfor the transportation
Can you provide the samples?
A:Yes we provides free sample less than 5kg,you only need to payfor
the transportation cost
Can you produce the productaccording to customersrequirements?
A:Yes we have our own R&D teamtell us your request we can
fulfill it
What's your MOQ(min order quantity)?
A:Our MOQ is 500Kg,and we accept mixed order
Can you do an OEM?
A:Yes.we can do the brand loao and different packaae size
asyourrequirements
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Company Display:
Good Quality Drilled And Slotted Brake Disc Carbon Ceramic Brake Disk For Passat Front Wheel
Inquiry Cart
0