Foot Pedal Pads Set For Tesla Model 3 Model Y Non-Slip Performance Aluminum Car Accessories
Brand Name:Aorun
Model Number:Aorun
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
dirct Manufacturers Fast Dry craft Crystal Clear Epoxy Resin Table Floor Art Epoxy Resin For Wood
Quick Detail:
| Name | Art resin XO-03 | Usage | Construction, Fiber & Garment, Footwear & Leather, Packing,etc. |
Mixing Ratio | 2:1 | Feature | High transparency, easy to eliminate bubbles, high hardness, anti-yellowing, fast curing |
Description:
Aorun XO-03 Epoxy Resin is the most advanced level of shine, gloss,
reflectivity, clarity and depth, and it locks in those optical
qualities forever. The most sophisticated system of synthetic
polymeric-based protection available. Our Commercial-grade epoxy is
engineered specifically for Bar Tops, Tabletops & Countertops.
Why Choose Us:
1. High transparency
2. After dry it is with high hardness as stones
3. High temperature resistance
4. Can cure at room temperature or heating curing
5. Automatic Defoaming
6. Yellowing resistance
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Note:
1. This product is a special glue for pouring on rough river beds.
The product dries slowly in a thin layer
2, low temperature slows down cooking or even stops cooking, low temperature environmental application using transparent high temperature baking adhesive
3, the bonding surface should remove dust, remove oil, keep the surface clean and dry
4, construction ratio must be accurate, improper ratio will not cure colloid or incomplete treatment.
5, AB glue should be kept completely closed and without contamination. After gluing, the lid of the container should be tightened as soon as possible to prevent moisture.
6. While stirring, try to stir gently in one direction so that no bubbles form. It should also be soft and light when pouring
7. It is recommended to use vacuum foamer which has the best effect. A gun or hot air gun can only remove bubbles within 0.5 cm of the surface
8, should be ventilated in the construction of the environment, use gloves, masks, goggles and other protective measures in the construction.
9. Don't take. If it accidentally gets into your eyes or mouth, rinse immediately with plenty of water and seek medical advice.
10. If you are allergic to resin, use it with caution
11, the non-dried adhesive can be cleaned with water and acetone. Protected adhesive can only be removed mechanically. If the skin is accidentally touched, it can be cleaned with lukewarm water and detergent.
2, low temperature slows down cooking or even stops cooking, low temperature environmental application using transparent high temperature baking adhesive
3, the bonding surface should remove dust, remove oil, keep the surface clean and dry
4, construction ratio must be accurate, improper ratio will not cure colloid or incomplete treatment.
5, AB glue should be kept completely closed and without contamination. After gluing, the lid of the container should be tightened as soon as possible to prevent moisture.
6. While stirring, try to stir gently in one direction so that no bubbles form. It should also be soft and light when pouring
7. It is recommended to use vacuum foamer which has the best effect. A gun or hot air gun can only remove bubbles within 0.5 cm of the surface
8, should be ventilated in the construction of the environment, use gloves, masks, goggles and other protective measures in the construction.
9. Don't take. If it accidentally gets into your eyes or mouth, rinse immediately with plenty of water and seek medical advice.
10. If you are allergic to resin, use it with caution
11, the non-dried adhesive can be cleaned with water and acetone. Protected adhesive can only be removed mechanically. If the skin is accidentally touched, it can be cleaned with lukewarm water and detergent.
FAQ:
Q1. Can you send me samples for reference?
A: We are glad to send you samples. Free samples, if the quantity is lower than 3 pcs. Freight should be paid by the buyer.
Q2. How to solve the quality problem after sales?
A: Take the photos or videos of the problem to us. After confirm the problem, we will make a satisfied solution to you.
Q3. What is the lead time?
A: 25 - 30 days after received the deposit.
Q4. What about the price?
A: We promise the price offer is the lowest if same application, only to enlarge the market share.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Foot Pedal Pads Set For Tesla Model 3 Model Y Non-Slip Performance Aluminum Car Accessories
Inquiry Cart
0