Adhesive Glue 3118 Art Epoxy Resin Natural Defoaming For River Art Table
Brand Name:Aorun
Model Number:Aorun 3118
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Place of Origin:Chongqing, China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
3118 self leveling natural defoaming Clear craft Adhesive Glue Art Epoxy Resin And Hardener For River Art Table
Quick Detail:
| Name | Art resin3118 | Application | River table |
Mixing Ratio | 3:1 | Function | Low odor,Low viscosity,High transparency,Long potlife |
Description:
1. Epoxy resin 3118 is a high tiansparent epoxy resin that cures
under normal and low temperature conditions.
2. self leveling, natural defoaming, low viscosity, high hardness and high-hardness.
3. It can be cured at room temperature or by heating. Dedicated to Ultra Clear, High-Build, High-Gloss Coating used to create stunning glossy coatings on artwork, bar-tops, counter-tops and furniture, etc.
4. normal conditions can be reach a 5-7years anti yellow.
2. self leveling, natural defoaming, low viscosity, high hardness and high-hardness.
3. It can be cured at room temperature or by heating. Dedicated to Ultra Clear, High-Build, High-Gloss Coating used to create stunning glossy coatings on artwork, bar-tops, counter-tops and furniture, etc.
4. normal conditions can be reach a 5-7years anti yellow.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A,
B components are strictly according to the weight ratio, accurately
weighed, and stirit evenly along the inner wall of the container
clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment,
to avoid waste. When the temperature is lower than 15 ° C, please
pre-heat the A glue to 30 ° C and then adjust the rubber, easy to
operate (low temperature, A glue will thicken ); After use must
seal the lid,to avoid the product due to moisture absorption
scrapped.
3. When the relative humidity is more than 85%, the surface of the
cured product can easily absorb the moisture in the air to form a
whitemist.Therefore,when the relative humidity is more than 85%, it
is not suitable for room temperature curing. It is recommended to
use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Tips:
1. When used to communicate with food after recovery, the
temperature of the food must not exceed 0 degrees Celsius.
2. If the hardness is higher than 82D (sha hardness), it can be
polished immediately.
3. The mixing quantity must not exceed 5 kg and the thickness of the casting must not exceed 3 cm per layer.
4. If the temperature is above 25 degrees Celsius, it will recover quickly, please reduce the number of mixing / pouring by half, or it will be hard in the container;
5. The curing time will depend on the room temperature and the thickness of the casting, the room temperature is higher, the curing faster. This reduces the healing time required to lose weight
FAQ:
1.Why choose us?
We have done many OEMs, enable us to suggest you the best solution.
Bulk orders will be deducted from the total amount.
2. How to keep the Epoxy resin?
The shelf life of the product is 12 months; keep away from direct
sunlight exposure and always keep the cap sealed.
3. There is a missing product in the package. what do i do?
Contact our support team and we'll confirm your order with the
contents of the package. We apologize for any inconvenience.
4. What is the curing time?
The cured time of the gel depends on different situation, ex: the
depth of the mold, the color of the gel or the light source.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Adhesive Glue 3118 Art Epoxy Resin Natural Defoaming For River Art Table
Inquiry Cart
0