Crystal Clear Epoxy Resin Flooring Coating for Anti Dust Concrete floor insulation Epoxy Floor Paint and Metallic Floor
Brand Name:Aorun
Model Number:Aorun 2181
Minimum Order Quantity:450KG
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T,, MoneyGram, Western Union
Place of Origin:China
Contact Now
Add to Cart
Active Member
Location:
Chongqing Chongqing China
Address:
Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Supplier`s last login times:
within 23 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Crystal Clear Art Resin Coating 100% Solid Two Component Anti UV Epoxy Resin Casting for Bar Tops Tabletops Countertop
Quick Detail:
| Name | Art resin 2181 | Application | coating wood table tops, wood veneers, countertops, artwork, perspective packaging, photo frames, Epoxy, badges, high-grade
resin and other electronic parts insulation, moisture-proof
potting, confidential cover. |
| Type | BPA | Function | Anti-corrosion, beautiful, anti-yellowing, transparent, non-toxic and harmless |
Description:
1.Epoxy resin 2181 is a clear epoxy resin that cures under normal
and low temperature conditions.
2.It has good leveling, natural defoaming, low viscosity, high
hardness and high strength.
3.It can be cured at room temperature or by heating. Dedicated to
crystal drop board, marble board, 3D floor insulation, metal floor,
kitchen countertop, resin coating, high hardness coating on any
surface; and other electronic parts, moisture-proof potting, secret
masking, etc.
4.normal conditions can be reach a 5-7years anti yellow.
5.The maximum thickness of one potting can reach 5-7cm.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory
environment
with a temperature of 25°C and a humidity of 70%. It is for
customer reference only
Operative method and tips:
1. Working environment: Please keep the plastic container clean. A,
B components are strictly according to the weight ratio, accurately
weighed, and stirit evenly along the inner wall of the container
clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment,
to avoid waste. When the temperature is lower than 15 ° C, please
pre-heat the A glue to 30 ° C and then adjust the rubber, easy to
operate (low temperature, A glue will thicken ); After use must
seal the lid,to avoid the product due to moisture absorption
scrapped.
3. When the relative humidity is more than 85%, the surface of the
cured product can easily absorb the moisture in the air to form a
whitemist.Therefore,when the relative humidity is more than 85%, it
is not suitable for room temperature curing. It is recommended to
use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Tips:
1. If it is used to contact food after curing, the temperature of
the food should not exceed 50 degrees Celsius.
2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished.
3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer.
4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container;
5.Curing time will be depend on room temperature and casting thickness , the room temperature higher it is, the faster curing it does. The thinner it cast the longer curing time it needs;
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets
are normal size. Customized
Crystal Clear Epoxy Resin Flooring Coating for Anti Dust Concrete floor insulation Epoxy Floor Paint and Metallic Floor
Inquiry Cart
0