MDIO SMbus BOM Electronic Components I2C IC Chip 8 Bits TXS0108ENMER Texas Instruments
Brand Name:Texas Instruments
Model Number:TXS0108ENMER
Minimum Order Quantity:1 piece
Delivery Time:2~8 workdays
Payment Terms:T/T
Brand:Texas Instruments
Contact Now
Add to Cart
Active Member
Location:
Guangzhou Guangdong China
Address:
Room 2201-03, Room 2206, Changfeng International 1, No. 96, Lixin No. 12 Road, Zengcheng District, Guangzhou City, Guangdong province
Supplier`s last login times:
within 47 hours
Product Details
Company Profile
Product Details
PRODUCT DESCRIPTION
One-Stop Service of MDIO SMbus I2C IC Chip 8 Bits TXS0108ENMER Texas Instruments
IC Electronic Components Texas Instruments/TI TXS0108ENMER
| Technology Family | TXS |
| Applications | I2C, MDIO, SMbus |
| Bits (#) | 8 |
| High input voltage (Min) (Vih) | 1 |
| High input voltage (Max) (Vih) | 5.5 |
| Vout (Min) (V) | 1.4 |
| Vout (Max) (V) | 5.5 |
| IOH (Max) (mA) | 0 |
| IOL (Max) (mA) | 0 |
| Rating | Catalog |
Features for the TXS0108E
- No direction-control signal needed
- Maximum data rates
- 110 Mbps (push pull)
- 1.2 Mbps (open drain)
- 1.4 V to 3.6 V on A port and 1.65 V to 5.5 V on B port (VCCA ≤ VCCB)
- No power-supply sequencing required – either VCCA or VCCB can be ramped first
- Latch-up performance exceeds 100 mA per
JESD 78, Class II - ESD protection exceeds JESD 22 (A Port)
- 2000-V human body model (A114-B)
- 150-V machine model (A115-A)
- 1000-V charged-device model (C101)
- IEC 61000-4-2 ESD (B port)
- ±8 kV contact discharge
- ±6 kV Air-gap discharge
Description for the TXS0108E
This device is an 8-bit non-inverting level translator that uses two separateconfigurable power-supply rails. The A port tracks the VCCA pin supplyvoltage. The VCCA pin accepts any supply voltage between1.4 V and 3.6 V. The B port tracksthe VCCB pin supply voltage. The VCCB pin accepts anysupply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectionaltranslation between any of the 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance(Hi-Z) state.
To ensure the Hi-Z state during power-up or power-down periods, tie OE to GND through apull-down resistor. The minimum value of the resistor is determined by the current-sourcingcapability of the driver.
MDIO SMbus BOM Electronic Components I2C IC Chip 8 Bits TXS0108ENMER Texas Instruments
Inquiry Cart
0