Product Details
Grade 410 Stainless Steel Sheet
400 SERIES STAINLESS STEEL
The 400 series group of stainless steels typically have an 11%
chromium and 1% manganese increase, above the 300 series group.
This stainless steel series tends to be susceptible to rust and
corrosion under some conditions although heat-treating will harden
them. The 400 series of stainless steels have a higher carbon
content, giving it a martensitic crystalline structure that
provides the end product with high-strength and high-wear
resistance. The 400 series steels tend to be used in agricultural
equipment, gas turbine exhaust silencers, hardware, motor shafts,
and more.
Type 410 is hardenable, straight-chromium stainless steels which
combine superior wear resistance of high carbon alloys with the
excellent corrosion resistance of chromium stainless steels. Oil
quenching these alloys from temperatures between 1800°F to 1950°F
(982-1066°C) produces the highest strength and/or wear resistance
as well as corrosion resistance. Type 410 alloy is used where
strength, hardness, and/or wear resistance must be combined with
corrosion resistance
CHEMICAL COMPOSITION
Element | C | Mn | Cr | Ni | P | S | Si |
409 | 0.03% | 1.00% | 10.5~11.7% | 0.50% | 0.04% | 0.02% | 1.00% |
410 | 0.08~0.15% | 1.00% | 11.5~13.5% | 0.75% | 0.04% | 0.03% | 1.00% |
420 | 0.15% | 1.00% | 12.0~14.0% | - | 0.04% | 0.03% | 1.00% |
430 | 0.12% | 1.00% | 16.0~18.0% | 0.75% | 0.04% | 0.03% | 1.00% |
MECHANICAL PROPERTIES
Grade | Tensile Strength (MPa) Min | Yield Strength 0.2% proof (MPa) Min | Elongation (%in 50mm) Min | Rockwell B(HRB) Max |
410 |
510
| 290 | 34 | 82-96 |
410 COMMON APPLICATIONS
The typical applications of grade 410 stainless steels are listed
below:
- Bolts, screws, bushings and nuts.
- Petroleum fractionating structures.
- Shafts, pumps and valves.
- Mine ladder rungs.
- Gas turbines
Company Profile
Qingdao Teste Metal Products Co., Ltd. is a professional
manufacturer with more than 20 years of experience in manufacturing
stainless steel and carbon steel establised in 2018. Our location
is in Wuxi - the largest stainless-steel processing center in
China.
We have our own factory and provide a one-stop service for cutting,
forming and surface processing of metal products.
Also we cooperate with TISCO,CHENGDE,TSINGSHAN,DELONG,YONGJIN,
HONGWANG,JISCO,QPSS, POSCO-ZPSS and ESS.