Product Details
ASTM A192 / A192M Seamless Carbon Steel Boiler Tubes for
High-Pressure Service
ASTM A 192 boiler tube equivalent EN 10216-2, DIN 17175, BS 3059 Part II, NF A 49-213, NBR 5594 ASTM (American Society for Testing Materials standard) A192 and ASME
(American Society of Mechanical Engineers standards) SA192.
Equivalent Materials 1010, St35.8, 360. FASTWELL has standard
specifications for minimum-wall-thickness, seamless carbon steel
boiler and super heater tubes for high-pressure service.
The standard specification of SA 192 tube below shows the weight of
each and every component present in this material to improve its
compatibility.
ASTM A192 TUBES MECHANICAL PROPERTIES
Seamless&Welded | Tensile Strength | Yield Strength |
ASTM A192 | 325MPa | 180MPa |
ASTM A192 TUBES CHEMICAL COMPOSITION
Element | Carbon,C | Manganese,Mn | Ohosphorous,P | Sulfur,S |
ASTM A192 | 0.06~018% | 0.27-0.63% | 0.035% | 0.025% |
Testing Requirements for seamless ASTM Q179/SA179 carbon steel pipe
(1)Hydrostatic Testing:
Inspection test pressures produce a stress in the pipe wall equal
to 60% of specified minimum yield strength (SMYS) at room
temperature. Maximum pressures are not to exceed 2,500 psi for NPS
3 and under, and 2,800 psi for the larger sizes. Pressure is
maintained for no less than 5 seconds.
(2)Mechanical Tests:
Tensile Test: Either transverse or longitudinal are acceptable for
NPS 8 and larger
Tensile tests smaller than NPS 8: Longitudinal testing only
Flattening Test: NPS 2 and larger
Bending Test (cold): NPS 2 and under
MATERIAL SPECIFICATION REQUIREMENTS FOR A SPECIFIC ORDER
- When we place a specific order for SA 179 tubing, we should include
below material specifications:
- Standard and the name of material: ASTM A179 / ASME SA 179 seamless
tubes.
- Manufacturing types in cold drawn
- Quantity in meters, feet, or pieces.
- Size including Diameters and minimum wall thickness
- Length per pieces (Random or fixed length shall be specified)
- Chemical composition (optional)
CARBON STEEL PIPE STANDARD AND GRADES(SEAMLESS AND WELDED)
- ASTM A106 Gr. B in Seamless (Differences between ASTM A106 and A53
pipe)
- ASTM A53 Gr. A, B in Seamless, Welded ERW, and Zinc coated,
hot-dipped galvanized steel pipe
- ASTM A179 Gr. C in Seamless (For seamless cold drawn low carbon
steel heat-exchanger and condenser tubes)
- ASTM A192 (For seamless carbon steel boiler tubes for high-pressure
service)
- ASTM A252 (For welded and seamless steel pipe piles)
- ASTM A333 GR. 1, 2, 3, 4, 5, 6 (For seamless and welded steel pipe
for low-temperature service and other applications with required
notch toughness)
- ASTM A134 and ASTM A135 (For electric resistance welded ERW steel
pipes)
- API 5L Pipe, ISO 3183 / API 5L Gr. A, B, X42, X46, X52, X56, X60,
X65, X70, X80 in seamless and welded (LSAW, SSAW, ERW) steel pipe,
for petroleum and natural gas industries, steel pipe for pipeline
transportation systems.
- DIN 2440 seamless and welded steel pipes applies to medium-weight
tubes suitable for screwing. (DIN2444 Zinc coated steel tubes, for
hot galvanizing)
- CSZ Z245 Seamless and ERW welded pipe (low-frequency electric
welded pipe excluded), SAW steel pipe that intended for oil and gas
pipeline systems.
- NBR 8261 Cold-Drawn, Cold-form, welded steel pipe, in circular
cross-section, square or rectangular, applied to structural
purposes.
- AWWA C-200 for steel water pipe
More standards material available in case special requirement
Company Profile
Qingdao Teste Metal Products Co., Ltd. is a professional
manufacturer with more than 20 years of experience in manufacturing
stainless steel and carbon steel establised in 2018. Our location
is in Wuxi - the largest stainless-steel processing center in
China.
We have our own factory and provide a one-stop service for cutting,
forming and surface processing of metal products.
Also we cooperate with TISCO,CHENGDE,TSINGSHAN,DELONG,YONGJIN,
HONGWANG,JISCO,QPSS, POSCO-ZPSS and ESS.