VTU-500 GI GAS FUEL INJECTOR TEST RIG
Brand Name:AIERSEN
Certification:ISO9001
Model Number:VTU-500 GI
Minimum Order Quantity:1
Delivery Time:30 days
Place of Origin:CHINA
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou China
Address:
2nd Floor, Comprehensive Building, No. 201, Zouxin Road, Zouqu Town, Zhonglou District, Changzhou City
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
VTU-500 GI GAS FUEL INJECTOR TEST RIG
1. Describe
The gas valve testing device vtu 500 GI is designed for effective
testing of gas valves in 2-stroke
marine gas engines. Well-functioning and non-leaking gas valves are
essential for gas engines safety
and provide an efficient combustion and therefore low fuel
consumption.
The testing device vtu 500 GI is designed according to the
requirements of the engines to test
the injector valves, window valves, block valves, closable
non-return valve,relief valves and bleed valves.
2. Features
The gas valve testing device vtu 500 GI is a pneumatic/hydraulic
test bench equipped with a
supercharger, which is used to provide correct gas pressure for
simulation. The nitrogen bottle
should be provided by the user. The test unit is a special tool for
testing gas valves both on board and in workshops.
The gas valve testing devicevtu 500 GI is equipped with a combined
valve seat related to the engine, which is used to test the injector valves, window valves,
block valves, closable
non-return valve,relief valves and bleed valves.
3. Technical data
| Max. air inlet pressure | 15 Bar |
| Air consumption | 600 - 2000 l/min; 7bar |
| Air quality according | ISO 8573-1 |
Hydraulic output pressure | Max. 420 bar @ 7 bar for air(seal oil); Max. 300 bar @ 7 bar for control oil |
| Max oil flow at no pressure | 3 L / min @ 7 bar for air input (control oil and sealing oil) |
| Cycle frequency | 300 cycles/min air input 7 bar, no output pressure |
| Oil discharge rate | 10 cm3/ time for control oil and sealing oil |
| Tank capacity | 15L |
| Gauges | Class 1.0 |
| Nitrogen input | Min 30bar |
| Power consumption | 100 - 240 V 50/60 Hz, Max 120 VA |
| Weight | 350 kg |
| (D x W x H)Dimensions | 520x2000x1600mm(5 valves) |
Included adapters | Hydraulic outlets:2 pcs of 1.5 m high pressure hose with116 (control oil) and 125(sealing oil) series couplings |
| Nitrogen inlet :3.2m hoses with male G1/4 connector included | |
| Nitrogen outlet :1.5m hoses with female M16X2 connector included | |
| Electrical:With 5 meters of cable | |
| Air inlet: Claw coupling for 1/2" hose | |
Output pressure | Control oil: 300 bar |
| Sealing oil: 380 bar | |
| N2: 350 bar |
4.Function
The testing device vtu 500 GI is designed according to the
requirements of the engines to test
the injector valves, window valves, block valves, closable non-return valve,relief valves and bleed valves.
VTU-500 GI GAS FUEL INJECTOR TEST RIG
Inquiry Cart
0