200Nm Pneumatic Torque Wrench Hand Operated Power Tool And For Tightening And Uns
Brand Name:AI LE SEN
Certification:ISO9001
Model Number:DSP
Minimum Order Quantity:1 set
Delivery Time:In stock
Payment Terms:D/P, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou China
Address:
2nd Floor, Comprehensive Building, No. 201, Zouxin Road, Zouqu Town, Zhonglou District, Changzhou City
Supplier`s last login times:
within 12 hours
Product Details
Company Profile
Product Details
Pneumatic Torque Wrench Is A Hand-Operated Power Tool And Must Be Used Exclusively For Tightening And Uns
Product description
Pneumatic Torque Wrench is a hand-operated power tool and must be
used exclusively for tightening and unscrewing bolted connections.
Never combine the wrench with other tools,such as impact screw
drivers or drill.
The minimum and maximum torques can be taken from the table
corresponding to the torque wrench and the corresponding setting
value must be selected.
Consumption of compressed air: 20 l/s at 6.3bar Nominal capacity:
0.85 KW Min. and max. torque values are recorded in the supplied
with each tool.
The wrench should only be put into operation using an air control
unit with pressure reduction valve, oiler, filter and water trap
Put the wrench onto the bolted connection set with the pre-selected
torque (see TORQUE SETTING). For the tightening procedure move the
support armagainst the abutment. For the loosening procedure turn
the support slowly towards the abutment by starting the motor. If
necessary start motor at intervals! Make sure the support arm has a
tight rest against the abutment. The reaction torque must be
absorbed by the support arm at the
level of the socket.
| Type | Bolt size | Torque values (Nm) | B (mm) | A (mm) | C (mm) | weight (Kg) |
| TWP096 | M10-M20 | 200-900 | 364 | 186 | 251 | 6 |
Warn!
On receipt of the product, visually inspect the item for any
evidence of shipping damage. Please note shipping damage is not
covered by warranty. If shipping damage is found notify the carrier
immediately and refrain from putting the product into service. The
carrier is responsible for repair and replacement costs resulting
from damage in transit shipment.
Read and follow all the instructions and safety
warnings carefully prior to use of the equipment. Failure to do so
could result in equipment damage or failure of the equipment or
personal injury.
All operators should ensure that all necessary personal protective
equipment as specified by their employer is worn when operating any
hydraulic equipment. Safety shoes, safety glasses/ visor and
protective gloves should be worn at all times. All relevant risk
assessments should be completed prior to use of the equipment
Read this entire manual before operating the torque wrench. Failure
to observe the following warnings could result in serious bodily
injury.These instructions are part of the torque wrench. They must
be kept in a safe place for later use and be passed along with the
torque wrench if it is sold, loaned, or otherwise transferred.
200Nm Pneumatic Torque Wrench Hand Operated Power Tool And For Tightening And Uns
Inquiry Cart
0