Waste water treatment station and recycle system

Waste water treatment station and recycle system

The utility model provides a sewage treatment device and a sewage treatment circulation system, which comprises a sewage remover, two sewage pumps, a first check valve, a second check valve, a cleaning tank, a circulating pump and a third check valve; The sewage pipe is connected with the inlet of the decontaminator, and the outlet of the decontaminator is connected with one end of the two sewage pumps in parallel, and the other end of the two sewage pumps is connected with the first check valve and the second check valve; The first check valve and the second check valve are connected to a port of the cleaning tank through the pipeline respectively; The other port of the cleaning tank is connected with the inlet of the circulating pump, and the cleaning tank is respectively provided with a sewage outlet and a liquid replenishment port; The third check valve is connected with the outlet of the circulating pump, and is connected with the sewage pipe through the pipeline.

1. Before assembly have a long time of test Working time can be adjusted.

2. under human-computer interface control. including fault display and warning device.

3. This Automatic electroplating line is good quality and reasonable price. High efficiency and capacity with easily maintenance.

4. This type of plating line are applied for hardware, stationery material, automobile, motorcycle parts , ASB industry

5. Applicable for plating simplex product without process change.

6. Electric conductivity equable, plating thickness equable, the horizontal and up/down motion controlled by hydraulic pump, the equipment is stable and silent while operating.

Spray painting, powder spraying, baking equipment

The service content includes: equipment shelf life within a year of free maintenance and warranty, equipment maintenance after the handover of the project, the provision of spare parts, free technical support under special circumstances, the control system software upgrade provided by our company, and so on.

1. Our company is a contractual and reputable enterprise in Jiangsu Province. We have standard and strict requirements for each contract and complete accounts, and perform each contract to the letter.

2, on the premise of ensuring quality, after the completion of the project, at the same time, hand over a complete engineering technical data to your factory, for easy maintenance.

3. The equipment of your factory shall be regarded as that of our company to ensure the normal operation and production, and train the operators of the production line for your factory free of charge at any time on site. It is our pursuit to create good benefits for your factory.

4. The warranty period shall be one year after the acceptance. If any quality problem occurs within 2 hours, Party B shall arrive at the scene within 12 hours upon receipt of the notice, complete the repair or replacement within 24 hours and bear the cost of repair and replacement; Party B shall be deemed to have failed to deliver the goods on time and Party A shall have the right to hold Party B liable for breach of contract if the goods fail to meet the quality standard agreed herein after Party B's two repairs. Party B shall also be responsible for repairing the problems caused by Party A's improper storage after the goods are delivered to the site, but the expenses shall be borne by Party A.

5. After the operation of the equipment, Wuxi New Environmental Protection Equipment Co., Ltd. will send one or two engineers to be responsible for the equipment escort service.

6. Party B shall designate a special person to contact Party A for after-sales service matters.

7, regular inspection: our company regularly send technical personnel to visit users, equipment inspection, at any time to understand the operation of the system, equipment use and the latest requirements of users, timely solve all kinds of software and hardware problems encountered by users.

Hotline consultation: by telephone, to provide customers with system consultation, machine fault diagnosis, simple problem solving and other services. For the problems that cannot be solved by telephone, the technicians of the local branch or office will be immediately notified to the site for maintenance. My company after-sales service contact person: Zhou Nanxing

My company southwest Chengdu Huangtianba after-sales service base contact person: Kuang Minggang

9, network support: can directly feed back the demand information through the network, and track and supervise the problem solving process, if necessary, can directly to the company's regulatory department to complain

The Wuxi New Environmental Equipment Co., Ltd. is located in Taihu Lake, Wuxi peaches, Taihu Lake, next to the Grand Canal Luoshe Community, specialty pearl nationally known. North by 312 National Road, Beijing-Shanghai high-speed railway, Shanghai-Nanjing Intercity, Shanghai-Nanjing Expressway; east by the new long railway Xiyi highway, luonan Avenue, straight-through before the plant by tin Yang Highway Wuxi, Changzhou, transportation is very convenient.

Wuxi entity of the new Environmental Protection Equipment Co., Ltd. is specializing in the production of plating equipment, painting equipment, environmental protection equipment, build factories there are thirty-two years old, is a vice chairman of China Surface Engineering Association executive director units, China Surface Engineering Association Electroplating Branch , painting branch vice president unit of China Surface Engineering Association, China Surface Engineering Association the special coating Member vice chairman of the unit, equipment and materials Member of China Surface Engineering Association vice chairman of the unit and president of the Association of Wuxi surface engineering units by The optimal combination of reform of the mechanism became a joint-stock enterprises, more than 120 existing staff, covers an area of 35,000 square meters, production plant and ancillary buildings of 25,000 square meters, 20 million yuan in fixed assets, liquidity 800 million, the plant has sufficient production inventory supplies of spare parts and services for users. In 2007 the output value of 60 million yuan, 70 million yuan in output value in 2008, completed in 2009 to 80 million yuan, 95 million yuan in 2010, completed in 2011 the output value of nearly 100 million. The factory is divided into independent contractor engineering workshop three (cold work sheet metal fitter assembly, plastic welding, engineering pipeline), machine shop, electrical control workshop. 91 Road, Hong Kong, China Enterprise Co., Ltd. joint venture, the introduction of foreignadvanced technology and quality equipment. To highlight the expertise I founded the the Xishan city plating Environmental Institute of Technology, 1998 Jiangsu coating technology engineering company "to move and my company. May 1999 was successfully held in my company to do the "China Surface Engineering Association executive enlarged meeting. The concern and support of the national industry experts, teachers, colleagues, established in 2000, pioneered a new environmentally friendly, plating, coating materials, equipment Supermarket "(ie new technology information collected, the popularization and application of raw and auxiliary materials and auxiliary equipment market) - referred to as "the new supermarket. The whole company formed from manufacturing equipment design, installation and commissioning, process technology, and raw materials supporting the production of turnkey and after-sale service system, providing turnkey engineering-oriented the user enterprise equipment renovation and new plants. Factory Day celebrations of the 30th anniversary held in 2011, a review of our factory in the history of the development of the industry and look forward to a better service for the industry's future.Mr. Zeng Yong-kai, all staff in the new situation, and firmly plant transformation, strengthen enterprise management, continuous improvement of product quality. Surface industry set 32 years design and manufacturing experience, and an open mind to the domestic and international industry colleagues to learn. Sincerity, which are of faith, the technology new, new, quality products to a new, willing to excellence in high-tech and perfect service, loyal and reliable, with you and your business to your success. Convinced that you are scheduled to become permanent friends.