ROHS Micro Stepper Motor Permanent Magnet 5VDC 2 Phase

High Precision 5D VC 2 Phase 8mm Permanent Magnet Micro Stepping Motor

8mm Claw Pole Permanent Magnet Micro Stepper Motor

The motor is a claw pole type permanent magnet stepping motor, which belongs to the category of small precision micro stepping motor.

The outer diameter of the motor is 8mm, the length is about 9mm, the step angle is 18 degrees, and the motor resistance is 10~50ohm, which can be selected according to the driving voltage and driving cir cutuit. In order to facilitate the customer to connect the driver, the motor socket generally has common mechanism options such as bare pin, PCB, connecting wire, and FPC.

In general, customers use motors with miniature gearboxes, and customers' equipment has reduction mechanisms. Or the motor can also be installed with a lead screw to increase the thrust, so as to achieve the purpose of moving parts.

The size of the motor is small and the output force is also small. The normal torque is only 1~3g.cm, which will be used in the micro precision control unit. For example: the movement and adjustment mechanism of the camera, the lens and filter of the optical instrument, the transmission mechanism of the miniature test paper with precise positioning, etc.

Stepper Motor parameter data sheet:

Stepper Motor torque curve:

Stepper Motor outside drawing:

Stepper Motor display:

User service and customization:

For this type of motor, we can provide a full range of customized services such as motor resistance, mounting plate size, shaft size, and wire outlet methods. To meet the different needs of customers to the greatest extent.

At the same time, the motor can be equipped with two reduction boxes, one is a 10*8 spur gear box, the reduction ratio range is 2~250; the other is a planetary reduction box, with a diameter of 8mm, and the reduction ratio is 1:14 1:16 1 :64 1:256 1:1024 1:4096 Six options.

In addition, we can also install a magnetic encoder at the back end of the motor according to customer needs. The PPR of a general encoder can be between 3 and 12, which is a specialized technique. Adding an encoder to such a small motor is no easy feat.

Changzhou Vic-Tech Motor Technology Co.,Ltd( follows,we only call company) was founded in year 2011, the company mainly develops, manufactures and sells micro stepper motors, micro gearboxes, micro slider motor, micro linear motor and other products

The company is located in the Yangtze River Delta Economic Belt, one of the most economically developed regions in China, and is located in Changzhou City, Jiangsu Province, with a beautiful environment. The company is 20 kilometers away from Changzhou Airport, 5 kilometers away from the high-speed railway station, and 1 kilometers away from the high-speed intersection. And Shanghai and Nanjing are about 120 kilometers away. The transportation is very convenient, domestic and international logistics and transportation are very developed and convenient!

The main technical personnel of the company have worked in related industries for more than 10 years, and have working experience in foreign companies such as Japan, South Korea, Europe and the United States, and have working experience in domestic listed companies. Have systematic product development ability, perfect project management ability and good customer communication ability. The company has developed more than 30 customized projects for domestic and international first-class companies, and has cooperated with more than 20 large companies.

The company has a quality management system: ISO9001-2000, and continuously improves the management level and quality control ability through various methods. Relevant personnel often receive internal and external professional training and training, so as to achieve continuous improvement in ability.

The company has a variety of series of products, each series has a complete product system, and has its own exclusive patented products. At the same time, related products and solutions can be customized for customers. At present, the most standardized and perfect product series are:

1. PM type stepping motor series, the motor diameter is 6 8 10 15 20mm, this series of motors can be equipped with a reduction box, and can be used to make a screw bracket type slider motor.

2. Hybrid stepper motor series, the size of the motor base is 14 20 28 35 42 57 86mm, etc. At the same time, it can be equipped with different sizes and speed ratio reduction boxes, and can be equipped with different types and lead screws. Motors can be equipped with encoders to improve control accuracy.

3. There are 8*10 10*12 12*13 1024 horizontal miniature reduction gearboxes for miniature metal gearboxes. All series of products with speed ratios from 2 to 1000 have been standardized and produced in batches.

4. BYJ series motors, standard products such as diameter 20 24 28 35mm can be produced.

5. Linear motor series, three series with diameters of 20, 25, and 36mm are all mass-produced, which can match fixed shaft types, through shaft types and screw external drive types. There are different screw outer diameters, tooth pitches, etc. different needs.

The company has a wide range of products and has the ability to customize. The company has in-house tooling and fixture making equipment, fast proofing speed, high reliability of product quality and reasonable price. Welcome new and old customers, friends at home and abroad for consultation, proofing and cooperation