

Add to Cart
Gearless Motor Traction Machine
Gear-free tractor is an electric transmission device used in
elevator system, which is mainly used to drive elevator operation.
Compared with the traditional gear transmission mechanism, the
non-gear tractor adopts the direct drive mode, eliminating the gear
reducer and energy dissipation mechanism in the traditional gear
transmission.
Features and details of gear-free tractor include:
1.High efficiency: the gear-free tractor uses permanent magnet
synchronous motor or asynchronous motor as the driving source to
provide higher transmission efficiency through direct transmission.
Compared with the traditional gear transmission device, the
gear-free tractor can reduce the power loss and improve the energy
utilization efficiency.
2.Small size: the design of gear-free tractor is more compact and
the overall size is smaller, which is suitable for elevator
installation with limited space.
3.Stable and quiet: due to the characteristic of gear-free
transmission, the operation of gear-free tractor is more stable and
the noise is lower, providing a more comfortable experience of
taking the ladder.
4.Low maintenance cost: the structure of the gear-free tractor is
simpler, which reduces the maintenance and maintenance costs of
gear transmission and improves the reliability and service life of
the elevator.
ZFG65 ZFN200A MODEL RECOMMENDED FOR
Specification | Ratio | Load (Kg) | Speed (m/s) | Motor | Sheave | ||||||||||||||
Voltage (V) | Power (KW) | Current (A) | Frequency (Hz) | Pole (P) | Speed (r/min) | Torque (N*m) | Energy (%) | S Dia. (mm) | R No. | R Dia. (mm) | R Dist (mm) | Groove | β° | γ° | RLH(m) | ||||
ZFG87-320-040A1 | 2:1 | 320 | 0.4 | 220 | 1 | 7 | 23.5 | 16 | 170 | 55 | 69.9 | 87 | 60+5+60 | 2 | 60 | 15 | |||
ZFG87-400-040A1 | 400 | 1.2 | 8 | 65 | 71.1 | 15 | |||||||||||||
ZFG87-450-040A1 | 320 | 1.4 | 9 | 75 | 72.3 | 15 | |||||||||||||
ZFG87-320-050A1 | 2:1 | 400 | 0.5 | 220 | 1.3 | 7 | 29.3 | 16 | 220 | 55 | 72.4 | 87 | 60+5+60 | 2 | 60 | 20 | |||
ZFG87-400-050A1 | 450 | 1.5 | 8 | 65 | 73.6 | 20 | |||||||||||||
ZFG87-450-050A1 | 630 | 1.7 | 9 | 75 | 74.2 | 20 | |||||||||||||
ZFG87-320-063A1 | 2:1 | 320 | 0.63 | 220 | 1.6 | 7 | 36.9 | 16 | 277 | 55 | 74.5 | 87 | 60+5+60 | 2 | 60 | 25 | |||
ZFG87-400-063A1 | 400 | 1.9 | 8 | 65 | 75.6 | 25 | |||||||||||||
ZFG87-450-063A1 | 450 | 2.2 | 9 | 75 | 76.7 | 25 | |||||||||||||
ZFG87-320-100A1 | 2:1 | 320 | 1 | 220 | 2.5 | 10 | 58.5 | 16 | 439 | 55 | 78.6 | 87 | 60+5+60 | 2 | 60 | 30 | |||
ZFG87-400-100A1 | 400 | 3 | 12 | 65 | 79.1 | 30 | |||||||||||||
ZFG87-450-100A1 | 450 | 3.4 | 14 | 75 | 79.6 | 30 | |||||||||||||
ZFG87-320-040A2 | 2:1 | 320 | 0.4 | 380 | 1 | 4 | 23.5 | 16 | 170 | 55 | 69.9 | 87 | 60+5+60 | 2 | 60 | 15 | |||
ZFG87-400-040A2 | 400 | 1.2 | 5 | 65 | 71.1 | 15 | |||||||||||||
ZFG87-450-040A2 | 320 | 1.4 | 6 | 75 | 72.3 | 15 | |||||||||||||
ZFG87-320-050A2 | 2:1 | 400 | 0.5 | 380 | 1.3 | 4 | 29.3 | 16 | 220 | 55 | 72.4 | 87 | 60+5+60 | 3 | 60 | 20 | |||
ZFG87-400-050A2 | 450 | 1.5 | 5 | 65 | 73.6 | 20 | |||||||||||||
ZFG87-450-050A2 | 630 | 1.7 | 6 | 75 | 74.2 | 20 | |||||||||||||
ZFG87-320-063A2 | 2:1 | 320 | 0.63 | 380 | 1.6 | 4 | 36.9 | 16 | 277 | 55 | 74.5 | 87 | 60+5+60 | 2 | 60 | 25 | |||
ZFG87-400-063A2 | 400 | 1.9 | 5 | 65 | 75.6 | 25 | |||||||||||||
ZFG87-450-063A2 | 450 | 2.2 | 6 | 75 | 76.7 | 25 | |||||||||||||
ZFG87-320-100A2 | 2:1 | 320 | 1 | 380 | 2.5 | 7 | 58.5 | 16 | 439 | 55 | 78.6 | 87 | 60+5+60 | 2 | 60 | 30 | |||
ZFG87-400-100A2 | 400 | 3 | 8 | 65 | 79.1 | 30 | |||||||||||||
ZFG87-450-100A2 | 450 | 3.4 | 9 | 75 | 79.6 | 30 |
Optional Table
Type | Load(Kg) | Speed(m/s) | Sheave(mm) | Voltage(V) |
Outer rotor traction machine | ||||
ZFW320 | 320-630 | 0.5-1.75 | 320 | 380 |
ZFW400L | 630-1050 | 0.5-2.5 | 400 | 380 |
ZFW400L | 630-825 | 0.5-2.5 | 450 | 380 |
ZFW400L | 1000-1150 | 0.5-2.5 | 400/450 | 380 |
ZFW400L | 1250-1600 | 0.5-2.5 | 400/480 | 380 |
ZFW480 | 1250-1600 | 1.0-2.5 | 450/550 | 380 |
ZFW480 | 2000-2500 | 0.5-3.0 | 450/480 | 380 |
Inner rotor traction machine | ||||
ZFN320 | 630-1150 | 0.5-1.75 | 320 | 380 |
ZFN450 | 1600-3000 | 0.5-3.0 | 450 | 380 |
ZFN450 | 1600-3000 | 0.5-3.0 | 480 | 380 |
ZFN450 | 1600-3000 | 0.5-3.0 | 520 | 380 |
Household elevator traction machine | ||||
ZFN200 | 320-450 | 0.4-1.0 | 200/240 | 220/380 |
ZFN200A | 320-450 | 0.4-1.0 | 200/240 | 220/380 |
ZFG100 | 320-630 | 0.4-1.0 | 100 | 220/380 |
ZFG87 | 320-450 | 0.4-1.0 | 87 | 220/380 |
ZFG87 | 320-450 | 0.3-0.5 | 65 | 220/380 |
FAQ
1. What can I get the quotation?
Within 24 hours the inquiry will be reply.If you are very urgent
the price,
pls call us or tell us your email so that we will regard your
inquiry priority.
2. How can i get a sample to check your quality?
Provide our existing sample to check our quality,the shipping cost
need to paid by you.After price confirmation,you can
require for samples to check our quality,but sample cost need to
paid by you.the sample cost can be refundable if you bulk order
quantity reach our request.
3. What kind of files do you accept for printing?
PDF, Adoble Illustrator, CDR
4. Can you do the design for us?
Yes. We have a professional designing team,just tell us your
details and we will help to carry out your idrars into perfect
products.it's also ok if you do not have the complete files.Sent us
high resolution images,we can design the layout you want.
If you send your LOGO to us,we will make the artwork for you reference.
Should you have any question ,pls do not hesitate to contact me.