Product Details
S10227-10 Photoelectric Sensor Small-sized Resin-sealed CMOS Image
Sensor For Barcode Scanning Displacement Measurement
Use Cases:
- Barcode Scanning: The S10227 - 10's high - resolution 1(H)×512(V)
pixel configuration and 6.4 - millimeter - long photosensitive area
are great for reading barcodes. It can precisely identify barcode
lines and spaces, rapidly converting them into electrical signals
for subsequent decoding, facilitating fast and accurate barcode
data capture .
- Displacement Measurement: With its excellent linearity and high -
speed response capabilities, it's fit for displacement -
measurement equipment. The sensor monitors light reflection changes
from a moving object to figure out the object's displacement
changes. The quick 9434 - lines - per - second maximum line rate
enables real - time tracking of rapid displacements .
- Optical Testing Instruments: In optical devices like refractometers
and interferometers, the sensor's wide 400 - 1000nm spectral
response range is very helpful. It can detect diverse wavelengths
of light signals. The synchronous charge integration feature
stabilizes signal acquisition, so that it can accurately record
light intensity changes associated with refractive index or
interference phenomena, providing core detection support for
optical parameter analysis .
- Mini - Spectrometers: Mini - spectrometers need to detect light of
different wavelengths to analyze the spectral composition. The
S10227 - 10's sensitive spectral response and 700nm peak -
sensitivity wavelength make it able to effectively sense and
quantify different spectral components, enabling compact
spectrometers to achieve relatively accurate spectral detection and
analysis .
Features:
- High - Resolution Detection: It has a pixel count of 1(H)×512(V),
and the pixel size is 12.5×250μm. This enables it to perform
detailed and precise detection of tiny light - intensity
distribution differences and the fine structures of target objects
.
- Fast Signal Response: The maximum line - scanning speed reaches
9434 lines per second, and the response speed is extremely rapid.
It can capture fast - changing light - intensity signals and
dynamic light - source information instantaneously, which is
suitable for detecting high - speed - moving objects or scenarios
where signals vary promptly .
- Wide Spectral Adaptability: Its spectral response range is from
400nm to 1000nm, covering the visible light to near - infrared
spectral bands. This allows it to be sensitive to a variety of
light sources and optical signals within this spectral range, with
extensive application adaptability in multiple optical measurement
and sensing scenarios .
- Simple to Use: The built - in timing generator means that it just
requires startup and clock - pulse inputs to operate, without
relying on complex external control circuits. This simplifies the
user's circuit design and control logic, reducing the difficulty of
use and system complexity .
- Low - Noise Performance: The read - out noise is merely 0.45mV RMS.
The low - noise property ensures that the sensor output signal is
stable. When detecting weak light signals or in scenarios that
demand high - precision measurement, it can output data with high -
fidelity, avoiding signal distortion caused by noise .
- Small - Sized Package: The device uses a resin - sealed glass -
epoxy surface - mount package, sized at 4.4×9.1×1.6T mm. The
miniature structure is conducive to installation in compact
equipment, meeting the space - limited requirements of modern
miniaturized optoelectronic devices .
Parameter Category | Parameter Name | Specification | Unit | Remarks |
---|
Electrical Characteristics | Supply Voltage | 3.3 ± 0.3 | V (DC) | No reverse voltage protection |
| Operating Current | ≤ 80 | mA | Typical value at 3.3V operating voltage |
| Standby Current | ≤ 5 | μA | Low-power mode activated |
| Output Interface | I2C / SPI | - | Selectable via hardware pin |
| Output Data Rate | Up to 10 | Mbps | SPI mode; I2C mode up to 400 kbps |
Optical Characteristics | Spectral Response Range | 400 - 1050 | nm | Covers visible to near-infrared band |
| Peak Sensitivity Wavelength | 650 ± 20 | nm | Maximum light absorption efficiency |
| Optical Resolution | 1280 × 720 (720P) | Pixels | Effective pixel count, no dead pixels |
| Pixel Size | 2.8 × 2.8 | μm | Pixel pitch for light sensing |
Mechanical Characteristics | Package Type | Resin-sealed SMD | - | Surface-mount device package |
| Overall Dimensions (L×W×H) | 8.0 × 6.0 × 2.2 | mm | Excluding pin protrusions |
| Weight | ≤ 50 | mg | Typical value for single unit |
Environmental Characteristics | Operating Temperature | -20 ~ 70 | ℃ | No condensation allowed |
| Storage Temperature | -40 ~ 85 | ℃ | Dry environment (RH ≤ 60% RH) |
| Operating Humidity | 10 ~ 90 | % RH | Non-condensing |
Performance Characteristics | Response Time | ≤ 30 | ms | From light input to signal output |
| Recovery Time | ≤ 50 | ms | From signal off to output stabilization |
| Signal-to-Noise Ratio (SNR) | ≥ 45 | dB | At standard light intensity (1000 lux) |
Company Profile
Yijiajie Electronics is a full range of silicon pressure sensors
from the United States, FREESCALE/, GE, MEAS, SMI, and a full range
of sensing and control products from the United States pressure,
temperature and humidity, gas flow, current, Hall effect, etc.,
Japan HAMAMATSU flame, UV sensors, photodiodes, Japan FIGARO, UK
CITY, ALPHASENSE full range of semiconductors, catalytic,
electrochemical gas sensors, French HUMIREL/MEAS humidity sensors
and other international well-known companies authorized agents or
distributors, to provide customers with product information,
products Solutions, product selection, supply guarantee and
logistics services, etc.

