

Add to Cart
7ETO-100 055-0300-000 Electrochemical Ethylene oxide Gas Sensors 7 Series
This sensor is designed for the measurement of Ethylene Oxide
concentration in gas phase. It can be used as a pin-to-pin
replacement for the
standard 7-series electrochemical Ethylene Oxide sensors made by
other manufacturers.
Installation
Output signals from the sensor pins are different. Inappropriate
use of the pins in product design will affect the sensor
functionality. Exposure
to high concentrations of solvent vapors should be avoided under
any condition. Mechanical overstress may cause deformation or
cracks of
the plastic enclosure of the sensor. If the sensor is used in
extreme environmental conditions, please contact us for more
details.
Temperature Range | 20°C ~ 50°C |
Pressure Range | 1 ± 0.1 atm |
Humidity Range | 15% ~ 90%RH non-condensing |
Long Time Output Drift | < 2% signal/month |
Recommended Storage Temp | 10°C ~ 30°C |
Expected Operating Life | 2 years in clean air |
Storage Life | 6 months in original packaging |
Warranty | 12 months |