

Add to Cart
7OX-V AAV66-380 OxygenGas Sensor Replacement 100Ω Casing Material ABS Load Resistor
The data provided in this document are valid at 20°C, 50% RH and
1013 mBar for 3 months from the date
of sensor manufacture. Output signal can drift below the lower
limit over time. For guidance on the safe
use of the sensor and on sensor performance outside of these
environmental limits, please refer to the
Operating Principles.
ENVIRONMENTAL
Operating Temperature Range | -20°C to +50°C |
Recommended Storage Temp | 0°C to 20°C |
Temperature Coefficient | 0.2% signal / °C |
Absolute Pressure Range | Atmospheric ± 10% |
Differential Pressure Range | 40 mBar maximum |
Pressure Coefficient | <0.02% signal / mBar |
Relative Humidity Range | Intermittent:0 to 99%RH non-condensing |
Continuous:15 to 99%RH non-condensing |
IMPORTANT NOTES
Do not remove label. Do not solder to pins. When installing the
sensor into instrumentation,the sensor vent hole should not be
blocked.
The instrument should also be adequately vented. If the sensor vent
hole is blocked or if the instrument is not adequately vented,
sensor performance will be compromised.
For further details, refer to Operating Principles OP02.
LIFETIME
Long Term Output Drif | <5% signal / year |
Expected Operating Life | 2 years in air |
Storage Life | 6 months in original packaging |