Fast Drying Car Body Filler Easy To Scratch Smooth Yellow Easy To Sand Lightweight

Grey Yellow Green Smooth Easy To Sand Lightweight Car Body Filler

Description

• MJ-Coat Car Filler is a high quality lightweight polyester body filler designed for trade or handyman use in the filling of dents, cracks, holes or gaps.
• It is ideal for repairs to motor vehicles, boats, trailers, caravans, brickwork, concrete, guttering, furniture and hundreds of other repairs around the house.
• Its creamy texture makes it easy to apply with no drag and no sag even at high build levels.
• It is manufactured under vacuum to substantially reduce the incidence of pinholing; and the viscosity, gel and cure are strictly controlled to provide consistent quality.
• Car Filler exhibits minimal surface tack, easy sanding and good featheredging, and it provides excellent adhesion over mild steel, stainless steel, aluminium, fibreglass, wood, concrete, cement and fibro.

Properties

• Superior performance when compared to other similar products
• Fast drying/curing
• Fine particle size giving a very fine and smooth finish
• Easy to apply with excellent sag resistance
• Easy to sand with reduced paper clogging

MIXING:

• For best results, bring filler and provided hardener to room temperature (minimum temperature 68ºF).
• Knead product in pouch and hardener tube before use.
• Place a 4” diameter puddle of filler on a clean mixing surface; we recommend a non-absorbent plastic mixing board.
• Add a ribbon of cream hardener from edge-to-edge across the center of the filler puddle (puddles larger than 4” will require additional hardener); or measure hardener at 2% by weight of filler – a 100:2 ratio. Mix thoroughly with a plastic spreader, using a folding motion, until uniform color is achieved.
• At room temperature (75ºF) approximate setting time is 3-5 minutes.

IMPORTANT:

FOR PROFESSIONAL USE ONLY.

Read full instructions before use.

This product contains hazardous materials and therefore appropriate personal protective equipment should always be used. Please refer to the label and consult the safety data sheet for full handling instructions and personal protection information. MJ-Coat disclaims any liability where the user does not wear the recommended personal protective equipment. The above data is for information only and may change without prior notice. It is the Buyers responsibility to ensure the suitability of the products for their own use and check the information is up to date.

The recommendation of use of our products and application in our technical data sheets are based on our knowledge and experience. MJ-Coat is not responsible for the results obtained by others over whose methods we have no control and thereof MJ-Coat is not liable for consequential or incidental damages including loss of profits.

HENGHUI CHEMICAL COATING CO., LTD. is an experienced pioneer of Furniture Paint & Auto Paint, locals in Guangdong China.Our Company owns strong research and development ability, advanced production technology on Wood Paint & Auto Paint, and highly accurate testing instruments. The advanced equipment and effective inspection system we’ve got are good for guaranteeing product quality. Our company has obtained the certificate of iso9001:2000 and the certificate of ‘honest and reliable unit’ issued by local government.

Front Door of the Company

Aerial view of the factory

Factory office building

Office building lobby

Exhibition hall

Product R&D laboratory

Product R&D laboratory

Quarterly Meeting

Advanced production equipment

Finished product storage warehouse

Team Cohesiveness