Soft Automotive Body Filler Anti Oxidation High Temperature Resistant

Anti-Oxidation High Temperature Resistant Super Fine Soft Car Body Filler

Car Repair Quick-Drying High-Strength High-Temperature-Resistant Car Body Filler​

Description:

1. We blend microspheres with selected resins and talcs to produce an automotive body filler that is faster and easier to work, while yielding a stronger, more flexible and durable painting surface.
2. What separates MJ-COAT from the other lightweight brands is superior manufacturing and precise quality control, ensuring a consistent product time after time.

Features :

• Non-separating formula.
• Smoother texture.
• Easy to work with.
• Quicker, easier filing.
• Good adhesion to steel, metal, aluminum, fiberglass and wood surfaces.

SURFACE PREPARATION

• Clean surface with warm, soapy water to remove all wax, grease and oil. Allow to dry.
• Sand the damaged area with coarse 80 grit sandpaper to remove all paint, primer and rust down to bare metal.
• Sand 1 to 2 inches beyond damaged area.
• Remove sanding dust.

MIXING

1. Knead cream hardener tube thoroughly before using.
2. For a golf ball-size amount of filler, squeeze out 1+ 1/4-inch strip of hardener, or mix 3 inch diameter circle, 1/2-inch thick of filler to 3 inch strip of cream hardener.
3. Correct ratio is 2:100 by weight.
4. Mix thoroughly to uniform color on clean, nonporous surface.
5. Mix only small amounts that can be used within 3 to 4 minutes.
6. Do not add cream hardener in filler container

APPLICATION

1. Apply layer of mixed filler over repair area using firm pressure to assure maximum adhesion.
2. If necessary apply multiple coats to build contour higher for sanding.
3. Use of a dust mask is recommended.
4. Do not apply layers of filler that exceed 1/4-inch in thickness.
5. For best results apply at 45°F (7°C) or above.
6. Tempertures below 60ºF may lengthen cure times by 5 to 10 minutes.
7. For clean-up, use Acetone.

POT LIFE

• 3 to 4 minutes.

DRYING/SANDING TIMES

• Allow the application of filler to cure 20 to 30 minutes.
• Sand with 80 grit sand paper and featheredge with 180 grit sandpaper or finer.
• Wait 1 hour before painting.
• Drying time depends on temperature and amount of hardener used.
• Optional: Apply a very thin layer of MJ-coat Glazing & Spot Putty to fill pinholes or small imperfections if necessary.

HENGHUI CHEMICAL COATING CO., LTD. is an experienced pioneer of Furniture Paint & Auto Paint, locals in Guangdong China.Our Company owns strong research and development ability, advanced production technology on Wood Paint & Auto Paint, and highly accurate testing instruments. The advanced equipment and effective inspection system we’ve got are good for guaranteeing product quality. Our company has obtained the certificate of iso9001:2000 and the certificate of ‘honest and reliable unit’ issued by local government.

Front Door of the Company

Aerial view of the factory

Factory office building

Office building lobby

Exhibition hall

Product R&D laboratory

Product R&D laboratory

Quarterly Meeting

Advanced production equipment

Finished product storage warehouse

Team Cohesiveness