LASERSHOT New tactical gear PVS14 NNVT low light level Monocular night vision device image intensifier tube Gen 2+
Brand Name:CXXC
Model Number:CXXC
Minimum Order Quantity:500
Delivery Time:30 work days
Payment Terms:L/C, T/T, D/P
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
6/F, Building 614, Bagualing Industrial Area, Futian District,Shenzhen, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Cheap PVS-14 3rd Gen Manual Gain White Phosphor SNR 23+ FOV 50 Handheld Night Vision Monocular
DG1921-1X night vision monocular is a new product developed based on the latest optoelectronic technology. The instrument uses a high-performance second-generation/third-generation image intensifier, which has the characteristics of excellent performance, small size, light weight, clear imaging, and simple operation. operation, cost-effective, and by changing the objective lens (or attaching a multiplier). It can change magnification etc. The product can be hand-held or connected to a helmet, and can also be used alone. The night vision device is equipped with infrared auxiliary light source and automatic anti-glare protection system.The product has strong practicability and can be used for observation and hunting at night without lighting.
Model Number
DG1920-1X
Weight
160g
Effective Visual Distance
From 0.25m to infinity
IIT
Gen 2+
Resolution
60-64lp/mm
Photocathode type
S25
Lens system
F1.2, 25.8mm
Luminous sensitivity
700-1000μA/lm
MTTF
10000hrs
FOV
50deg
Diopter
+6/-6deg
Battery Type
1X CR123A lithium battery or 1XAA
Battery life(hrs)
100 (w/o IR) 40 (w IR)
Precautions
1. Do not disassemble the unit.
2. It's better to use device under +5°C to +40°C. After the unit usage in temperatures below zero, wait at least 3 hours at room temperature,to avoid condensation accumulating on the internal lens surfaces and the consequent fogging caused by extreme temperature differences.
3. Keep the device in soft carrying bag, ventilated and dry place with temperature which does not exceed +15°C. Keep away from heating device and avoid direct sunlight and high humidity which does not exceed 70%.
4. NVD should be used in nighttime and can't be aim at strong light. If you have to test it during daytime, the front lens cap
should never be removed. You can observe the target through the hole in the protection cap.
should never be removed. You can observe the target through the hole in the protection cap.
5. Use good quality lithium battery or alkaline cell, as bad quality batteries will effect the performance of the NVD and easily damage the device.
6. Try to avoid the rain and mist, and avoid dropping, shaking and collision.
7. Use clean soft cloth and dampened in alcohol,if necessary.
8. A useful tip is to remove the battery when the night vision will be not in use for over 3 days to prevent battery leakage and damaging the device.
NOTE: It is normal that the device can not be turned on when the ambient light exceeds 40 Lux. This device has protection system,which cuts off the image intensifier when ambient light level exceeds the limit of 40 Lux during a 10 seconds period.
Failture to follow the above precautions may cause the unit damage and will void the manufacturer's warranty.
LASERSHOT New tactical gear PVS14 NNVT low light level Monocular night vision device image intensifier tube Gen 2+
Inquiry Cart
0