Add to Cart
4ml Gray Glucose Tube Fluoride Tube Vacuum Blood Collection Tube Glass PET 13*75mm
Glucose/Fluoride tubes are generally used for blood glucose testing in clinical medicine.
The additive in this type of tube is sodium fluoride/potassium oxalate.
It adopts a new formula and process to prevent the degradation of blood sugar while avoiding the risk of
exogenous coagulation and hemolysis, and realizes the long-term stability of the specimen.
Cat.No | Material | Size | Volume | Cap Color | Packing |
JZ0G1375 | Glass/PET | 13*75mm | 2-4ml | Gray | 100pcs/tray, 1200/1800pcs per carton 1million pcs a 20FT container 2million pcs a 40FT container 2.6milion pcs a 40HQ container |
JZ0G13100 | Glass/PET | 13*100mm | 5-7m | Gray | |
JZ0G1316 | Glass/PET | 16*100mm | 8-10ml | Gray |
1. Check the tube;
2. Insert the blood collection needle into the vein after the skin disinfection;
3. Put the puncture needle into rubber stopper and the blood will automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8 times after collection(except no additive plain tube).
1. The needle should vertically piercing in the middle of rubber stopper;
2. Don't moving the rubber stopper;
3. Single use only. Discard after use;
4. It is prohibited to use the tube which are contaminated or have impurities in it;
5. In order to prevent blood spatter or avoid blood infection the operators should weargloves and other protective devices;
1. The vacuum blood collection tubes should be stored in cool dry place at 0℃-25℃;
2. The vacuum blood collection tubes shall be vertical and prohibited to invert.