

Add to Cart
Red Coagulant Tube Clot Activator Tube Glass Plastic 2ml 3ml 4ml 6ml Blood Collection Tube
This tube used for blood chemistry analysis, serology and blood banking.
The inner tube is coated with a clotting activator, which acts to speed up the clotting process, rather than an anticoagulant (so it does not affect the results when storing the tube for pure blood samples).
It can be used to test the blood chemistry and immunology, for example, the blood sugar, the cholesterol, the uric acid, the typhoid, the dengue fever, the syphilis, the herpes.
Cat.No | Material | Size | Volume | Cap Color | Packing |
JZ0C1375 | Glass/PET | 13*75mm | 2-4ml | Red/Orange | 100pcs/tray, 1200/1800pcs per carton 1million pcs a 20FT container 2million pcs a 40FT container 2.6milion pcs a 40HQ container |
JZ0C13100 | Glass/PET | 13*100mm | 5-7m | Red/Orange | |
JZ0C1316 | Glass/PET | 16*100mm | 8-10ml | Red/Orange |
1. Check the tube;
2. Insert the blood collection needle into the vein after the skin disinfection;
3. Put the puncture needle into rubber stopper and the blood will automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8times after collection(except no additive tube).
1. The needle should vertically piercing in the middle of rubber stopper;
2. Don't moving the rubber stopper;
3. Single use only. Discard after use;
4. It is prohibited to use the tube which are contaminated or have impurities in it;
5. In order to prevent blood spatter or avoid blood infection the operators should weargloves and other protective devices;
1. Vacuum blood collection tubes shall be kept at 0 ℃ - 25 ℃ in a cool, dry place;
2. The vacuum blood collection tubes must be vertical and must not be inverted.