ISO9001 Stainless Steel Mesh Pad Demister

ISO9001 Standard Stainless Steel Mesh Pad Demister For 960 - 430 Mm

Stainless Steel Mesh Pad Demister Technical Data:

Stainless Steel Mesh Pad Demister Description :

The mesh pad mist eliminator is designed to collect liquid particles contained in the vapour phase after boiling, vacuum evaporation or bubbling process.

Stainless Steel Mesh Pad Demister Technical principle :

1: Small droplets in the gas contact the wide surface of the filaments of the mesh pad mist eliminator, gradually grow into large liquid droplets and flow and drop by a special structure accelerating the coalescing of the liquid droplets. The mesh pad of the mist eliminator is highly porous, so the vapour gas passes through the mist eliminator without hindrance, leaving only pure gas.

2: The process is not a type of filtering as the hole size of the knit mesh is not specially related to the size of the liquid droplets. This mist elimination is caused by the collision and sudden change resulting from the flowing speed of the small liquid droplets, and the coalescing of the liquid drips and gravity cause their descent.

3:This is a process combing mechanical and physical phenomenon.

With 12 years' experiences, Hualai team is ready to provide considered service! Welcome your contact !

Demister Pad purpose​ :

1. Knockout drums and separators – save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up.
2. Absorbers – reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems.
3. Scrubbers – reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids.
4. Distillation columns – improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals.
5. Evaporators – prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems.
6. High pressure steam systems – provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades.
7. Refinery towers – increase throughput capacity-take deeper cuts for greater product yields – prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side draws-use lower grade crudes.

Hi,How are you ,wish everything go on well at yours,

Thanks for your visting our website ,now i will make a brief introduction for you ,

From 1982 years,our boss Mr Du creat a store to sell wire mesh in Wuhan China,several years later,he go back our hometown Anping ,Wire Mesh Hometown in the world ,located his own Factory ,until now has 40 year's experience .

In Fact ,i do not want to introduct how many machine we have ,how many workers we have ,because i think you do not care that ,we have so many not important ,you only treat what we can offer you as the most important

We have about 40 year's experience ,can offer you better quality with competitive price ,if you are distributor ,we can support you sell more and more prdocut

If you are end user,we must promise the quality ,and let your withour any worriend .

I alway think ,business not only business,it is the relationship between you and me like friend ,Trust is the most focus,i hope we can have a cooperation in the future.