

Add to Cart
Toxoplasma Gondii IgG Antibody ELISA Kit for Pet 96 Wells/Kit GMP ISO9001
1. Principle
This kit use indirect ELISA method to test specific Toxoplasma
gondii antibody in animal serum or plasma, it can be used as animal
toxoplasmosis secondary inspection. If there is Toxoplasma gondii
antibody in the sample, it will combine with coated Toxoplasma
antigen on plate and SPA enzyme conjugate on the second step. The
color reaction will reflect whether there is toxoplasma antibody in
the sample.
2. Reagents and contents
Code | Item | Spec. | Code | Item | Spec. |
1 | TOX-AgCoatedplates | 96 wells | 7 | Stop solution | 15 ml |
2 | EnzymeConjugate | 6 ml | 8 | Positive control | 1 ml |
3 | 10X Washing solution | 100 ml | 9 | Negative control | 1 ml |
4 | Substrate A | 15 ml | 10 | Adhesive Foil | 3 pieces |
5 | SubstrateB | 15 ml | 11 | Instruction sheet | 1 piece |
6 | Sample diluent | 100 ml | 12 | Serum diluent plate | 1 piece |
3. Materialrequired notprovided
1) Microplate Reader with 450nm and 630nm
2) 37 ℃thermostatic device
3) Micropipettes, adjustable.
4. Samplerequirement
1) This kit is used for onlydog, cat, rabbit and monkeyetc. serum
and plasma
2) To get the best test result, avoid using sample with severe
hemolysis, precipitate, contaminated by bacteria or protein
suspension.
3) The serum sample store at 2-8 ℃for 3 days, if for long term, it
should be kept at -20℃or lower, avoid repeated freezing and
thawing.
5. Test procedure
1) Washing Solution preparation: Dilute 10X Washing solution with
distilled water or deionized water at 1:10 (for example: take 100ml
10X Washing solution, add 900ml distilled water or deionized water,
mix),mix it evenly to get washing solution.
2) Sample diluent and adding sample: Dilute serum with Sample
diluent at 1:100, Add 100μl diluted serum sample into all sample
wells; If using Serum diluent plate, the dilution method is like
following:
Dilute at 1:100: Firstly add 50ul sample diluent into the coated
sample wells. On Serum diluent plate, add 245ul Sample diluent,
then add 5ul serum, use Pipette to mix it evenly, then take 50ul
Into coated sample wells for react. (Note: Serum diluent plate is
disposable, can not repeat use.)
3) Add controls: Positive control and negative control do not need
dilute, add directly. Set 2 blank controls, only add sample
diluent,100ul/well. Set 2 wells for negative control, only add
100ul negative control; 2 wells for positive control, only add
100ul positive control. Cover andIncubate in dark at 37 ℃ for30
minutes.
4) Washing plate: Discard the liquid of the well, add washing
solution into each well fully(250ul/well if using washing machine)
for 3 times, incubate for 1 min each time, at last time flap to dry
with the absorbent paper.
5) Adding Enzyme conjugate: Add 50ul Enzyme Conjugate into all
wells (except blank well) andincubate at 37℃ in dark for30 minutes.
Discard the contents of the wells and wash 3 times as described in
step 3.
6) Adding substrates: according to quantity needed, Add equal
volume of Substrate A and Substrate B, mix evenly. Add 100ul into
all well, incubate at 37℃ in dark for 10 minutes.
7) Add 50ul Stop solution into all wells to stop reaction. Set zero
at blank control, read the OD value at ELISA reader 450nm (630nm as
a reference).
6. Resultsinterpretation
1) Cut-off value(COV)=Average OD value of negative control x 2.1
(calculate as 0.08 when the OD value of negative control is less
than 0.08)
2) Validation judgement:
OD value of negative control≤0.15 (If>0.15, invalid);
OD value of positive control≥0.50 (If<0.50, invalid);
3) Results
Sample OD value ≥ COV, the result is Positive;
Sample OD value < COV, the result is Negative;
4) Limitation: This kit is only for Screening, not basis for
diagnosis.
7. Notes
1) MicroWell plate removed from the refrigerated environment should
be balanced moisture to dry at room temperature, then can be
opened. Put back unused MicroWell plate into dry foil bag and
sealed at 2~8 ℃.
2) Before adding reagent, gently shake dropping bottle and mix even
the reagent.
3 When incubation, must cover the plate with adhesive foil, do not
repeat use the adhesive foil.
4) Screw down the cap after use, don't mix caps between different
bottles and don't mix components between different kits
5) The test kit and any samples should be regarded as the source of
infection to properly handle. Stop solution is corrosive, be
careful to use.
8. Storage and expire date
Store at 2~8℃ in dark, no frozen, expiry date: 12 months.
Pathogen and its life history
-The pathogen of toxoplasmosis is Toxoplasma gondii, or Toxoplasma
gondii for short. Its entire development process requires two
hosts. The cat is the final host of Toxoplasma gondii. In the
epithelial cells of the small intestine of the cat, it carries out
fission proliferation and gametogenesis similar to the development
of coccidia, and finally forms an oocyst, which is discharged with
the cat feces. In the external environment, the oocyst develops
into an infectious oocyst containing two sporangia through spore
proliferation.
- Toxoplasma gondii has no strict choice of intermediate host. It
is known that more than 200 species of animals, including mammals,
birds, fish, reptiles and humans, can serve as its intermediate
host. Cats can also serve as intermediate hosts of Toxoplasma
gondii. In the intermediate host, Toxoplasma gondii can reproduce
asexually in the nucleated cells of various tissues and organs of
the body.
- Animals are infected by eating infected oocysts in cat feces or
meat, viscera, exudates, excreta and milk of intermediate hosts
containing tachyzoites or cysts of Toxoplasma gondii. Tachyzoites
can also infect the fetus through skin, mucous membrane and
placenta.
Q1: How long will it take for you to ship?
A1: Usually ships within 7 working days.
Q2: Do you support OEM/ODM?
A2: can be supported. We can customize according to your specific
needs and specific quantities.
Q3: How is your factory doing in terms of quality control?
A3: We have ISO9001 certification and ISO13485 certification, so
far all the production process, we have standard rules, we comply
with the relevant behavior and laws of the government.
Q4: Is after-sales service guaranteed?
A4: We provide professional online technical after-sales service.
If the product fails during the experiment, we can provide
one-to-one guidance through telephone, video and other forms.
Q5: What is your minimum order quantity?
A5: 1Kit.
Q6: What is the shipping method?
A6: It can be shipped by express (FEDEX, UPS, DHL, EMS, etc.) or by
air and ground.Please confirm with us before placing an order.