EPDM CR FKM Rolling Valve Rubber Diaphragm Seal Gas Pressure Regulating Installation

Customized Gas Pressure Regulating Installation EPDM CR FKM Rolling Diaphragm Valve Rubber Diaphragm

EPDM CR FKM Rolling Diaphragm​ Introduction:

The rolling diaphragm is in the shape of a top hat in the free state. CR Rolling Diaphragm is made of rubber with silk cloth. The top middle hole is used to install the valve stem. In order to install, fix and seal, the top and bottom can have O-ring edges. Or in the form of fixing holes around the bottom edge.

(1) There should be no straight edges and corners at the corners of the diaphragm, and arcs should be made to avoid easy fracture after folding and loss of glue during vulcanization. The intersection of the inner wall of the sleeve and the end face should also be poured with arc angles to avoid sharp corners. piece.
(2) Diaphragm material: nitrile rubber is used for natural gas and LPG, and chlorohydrin rubber is used for gas.
(3) There is an elastic polyester cloth interlayer in the diaphragm. Carefully observe the inner and outer surfaces of the diaphragm. One side can vaguely see the pattern of the mesh cloth, and the other side is a smooth surface. The smooth surface is required to be the pressure surface of the gas. Therefore, For the diaphragm installed in the forward direction, the smooth surface is on the inner surface of the diaphragm, and the smooth surface of the diaphragm installed in the reverse direction is on the outer surface, which can avoid leakage and improve the compressive strength of the diaphragm.

​EPDM CR FKM Rolling Diaphragm​ Material details:

For the present, common materials for rolling diaphragm are: natural rubber (NR), nitrile butadiene rubber (NBR), the performance of the two materials can meet the needs of most industrial environments. In special industrial environments (high temperature resistance, acid and alkali resistance) could use EPDM, fluorine rubber (FKM), neoprene rubber (CR) for production, but the cost is relatively high.

(1) Diaphragm material: nitrile rubber can be selected for natural gas and LPG, and chlorohydrin rubber can be used for gas.
(2) There is an elastic polyester cloth interlayer inside the diaphragm. Carefully observe the inner and outer surfaces of the diaphragm. One side can vaguely see the texture of the mesh cloth, and the other side is smooth. The smooth side is required to be the pressure surface of the gas. Therefore, For the diaphragm installed in the forward direction, the smooth surface is on the inner surface of the diaphragm, and the smooth surface of the diaphragm installed in the reverse direction is on the outer surface, which can avoid leakage and improve the compressive strength of the diaphragm.

EPDM CR FKM Rolling Diaphragm​ Specifications:

Our service:

1. Packaging is neutral packing or customized packing.

2. We will reply you within 24 hours.

3. We will also provide you with good after-sales service.

4. OEM or ODM orders are welcomed.

5. Trial orders are acceptable.

6. High quality and factory price.

7. 100% ensured the quality.

Hongum is specialized in research, production, sales, and distribution. It is located in the base of technology transfer of CAS, committed to research and development of new materials in both rubber and plastic industry.

Hongum supply various of rubber diaphragms, dampers and all kinds of other rubber and plastic hardwares for boat, yacht, wharf and sea farm industries, such as marine float, fast ray paddle, and other boat and wharf rubber and plastic accessories.

We have a full set of advanced production equipment from vulcanizing to final shipment, with international standards, using the same advanced production process, also have a full range of laboratory testing equipment, can conduct comprehensive experiments and test a variety of rubber and plastic material properties, also product performance tests. We have the most professional technical team which can integrate your idea and provide the best professional advice. With the most professional service and stable quality we have won the unanimous approval of the majority of domestic customers, and exported to Russia, the United States, Canada, Britain, India, Singapore and other international markets.

We always adhere to the "service-oriented, innovative, and provide customers with professional solutions" concept to create value, to achieve the cooperation successful and win together.

Our team has a number of person who love new material industry, full of passion, and the same mind. Our needs are derived from the public, we have the professional technical team for seal integration, we are your all-perspective communication consultant.