High Temperature Resistant Ss Pall Rings 16mm 38mm anti alkali

High Temperature Resistant Corrosion Resistant Metal Random Packing

Corrosion Resistant Metal Random Packing

With the continuous development of Pall ring packed towers, the gas distribution problem, which was neglected before, has gradually been paid attention to. In the case that the conventional device cannot meet the uniform flow of gas into the bed, a grid should be installed in the Pall ring packed tower to improve the mass transfer efficiency.

Corrosion Resistant Metal Random Packing Material:

When installing the Pall ring packed tower, it is necessary not only to ensure the initial distribution of the liquid is uniform, but also to ensure the liquid distribution of the entire Pall ring packed tower. This problem can be solved by adding a liquid redistribution device. Good liquid distribution can increase the free cross-sectional area of ​​gas passage, reduce gas passage resistance, increase operating flexibility, and reduce foaming and mist entrainment.

Corrosion Resistant Metal Random Packing Install

Other tower components of the Pall ring packing such as the support plate of the packing layer, the pressure plate, the full-section liquid collector at the packing section, and the redistributor are also important components to ensure the energy efficiency of the tower, and they should also be paid great attention.

When the material enters the Pall ring distillation column, it should not be supercooled and overheated. Since there is very little liquid phase retained in the Pall ring packed tower, some of the tower sections are simply used for heat exchange and lose their separation ability, which affects the separation effect of the entire tower.

When transforming the old tower with side feed or discharge, pay attention to the process conditions. After the transformation, the position of each side line must be aligned with the corresponding point in the vertical concentration distribution of the tower, in order to ensure the composition of the incoming and outgoing materials of each side line, which is difficult to achieve.

Applications

Various Separation and Absorption Applications

Absorption and Stripping Services

Steam Stripping

Quench Towers

Direct Contact Cooling

Reaction Towers

Distillation Columns

Tower Packing

At The An Hesheng Company, we offer Metal Pall Rings in a variety of different sizes, giving you the ability to optimize capacity and efficiency based on different application requirements.

Corrosion Resistant Metal Random Packing reference data (size customizable)

FAQ

Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB or CIF, packaging term, etc.

Q: Is the size fixed?
A: No, except for table size. Can be customized according to demand!

Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type of products you need.

Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific quantity and type.

About Us

Anping County Hardware Mesh Products Co., Ltd. is located in Anping County, Hebei Province, known as the "Hometown of Chinese Wire Mesh". The company is a dedicated manufacturer of wire mesh demisters. The company has more than 90 sets of knitted mesh equipment. The wire mesh demister is the main product of our company. Most of our employees are operation, maintenance, and installation personnel with practical experience, who can provide customers with the required engineering consultation and installation of tank filtration. solution.Nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard and popular sizes, we can also customize specific applications according to customer needs.
During the company's development, through continuous on-the-spot inspections, personal exchanges and cooperation with customers, and comprehensive discounts and technical support, we have won strong customer support and praise.
The company's performance has maintained an annual output value growth rate of 30-40. Our employees pursue the policy of "enterprising, truth-seeking, rigorous and united", continue to develop and innovate, take technology as the core, and wholeheartedly provide you with cost-effective products, high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to cooperating with you!

Anping Anhesheng Hardware Mesh Products Co., Ltd., our company has been committed to the field of industrial filtration for many years, with filter elements, filter accessories, bridge guardrails, industrial dust removal and other related products, 14 years of export experience, since 2007, our company It has established business in many international regions such as Europe, the Middle East, Southeast Asia, North America, etc., and has served with many global companies, aiming to build a benchmark in the field of industrial filtration and separation. The company has more than 40 sets of production equipment, and the wire mesh demister is one of our main products. Our employees are operation, maintenance and installation personnel with many years of practical experience, who can provide customers with the required tank filtration. Engineering consulting and solutions, customized design and service are our core service tenets, and also solve your multiple concerns during use.
Our company has nearly 20 years of experience in the production of mist eliminator mats, knitted wire mesh and other metal products. We have ISO9001 certification and EU quality system certification. We promise that all products received by our customers have passed the quality inspection standards and have perfect performance. We have different specifications, in addition to standard and specific sizes, of course, customization is also our main direction, we are professional, you are more assured.
During the development of our company, we have visited customers many times and provided customer factory inspection services, professional technical accompaniment to explain the introduction, the whole process of the real plant and equipment environment, so that you can truly see your product production process, we can also provide real factory inspection, high-definition The video of the same frequency with your real-time interaction, solve your worries. The praise from thousands of customers is the best recognition for us. At the same time, because of the trust of customers, our company's production capacity maintains an annual growth rate of 30%-40%. Our company's vision: professional, precise, elite, we will wholeheartedly provide you with cost-effective products, high-quality engineering design and services.
All staff of Anping Anhesheng Hardware Mesh Products Co., Ltd. look forward to your cooperation