OEM Deep Cycle Lithium Ion Truck Battery 150Ah Telecom Tower Battery
Brand Name:ZTSW/OEM/ODM
Certification:CE/ROHS/ISO/UL certificate
Model Number:48V150Ah
Minimum Order Quantity:200pcs
Delivery Time:5-10days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Shenzhen China
Address:
No. 96, Jinju Lower Road, Fuyong Street, Baoan District, Shenzhen
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Deep cycle Litium ion battery 48V 150Ah telecom base station rack
mounting batteries
Deep cycle Litium ion battery 48V 150Ah telecom base station
batteries
Quick Detail:
LiFePO4 Battery
Maintenance Free & No Leakage
Extended Service Lifetime
Longer Shelf Life
Excellent Deep Discharge Recovery
Install Them Anywhere
Certification CE, FCC, PSE, UN38.3, MSDS, sea and air transport
report
Description:
LiFePO4 battery has a built-in BMS High temperature resistance can reach 75℃,The built-in high
temperature cut-off function prevents charging at temperatures above 75℃,Can prevent short circuit,
over charge, over discharge, over current.Operating temperature: Charge at 0℃-45℃;Discharge at -20℃-60℃.
LiFePO4 batteries can be used in the following fields: electric vehicles, recreational vehicles, golf carts,
boathouses, towing motors, lighting, UPS backup power supply, home solar equipment, portable TV, etc.
Lead-acid batteries can only use 200-400 cycles, and our LiFePO4 battery can cycle 4000+ times, and in the
state of full charge and full discharge can cycle more than 1500 times, the service life of lead-acid battery is 3 times.
LiFePO4 battery,Can achieve truly deft effect,It weighs only 30% as much as a typical lead-acid battery,
Only 96.8 pounds Easy to carry and easy to install is the best choice for camping.
Specifications:
| Batterypack | No. | Item | General Parameter | Remark | |
| 1 | Combination type | I6SIP | |||
| 2 | Total energy | 5l20Wh | 5.12/kWh | ||
| 3 | Cycle life | *000 次 | |||
| 4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) | |
| Minimum Capacity | 100 Ah | ||||
| 5 | Rated voltage | 512 V | Wordking voltage | ||
| 6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage | ||
| 7 | Charging voltage | 58.4V | maximum battery voltage | ||
| 8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK scheme) | Under half elec trie state, use AC method to measure internal resistance Ikllz | ||
| 9 | consistency | The monomer pressure difference at the end of charge and discharge is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous pressure difference in a single charging section | ||
| 10 | Maximum charge and discharge duration current | I00A | |||
| 11 | The charging current limiting | 10A | |||
| 12 | forking temperature range | Charge: 0-55'C | |||
| Discharge: -20-^0'C | |||||
Notices:
1. For outdoors, only to generate power. The efficiency of a solar
panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use,
otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to
move your electronic device into a
cool and ventilated place. If the electronic device is in a
high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
FAQ:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly, We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Contact us for more details about Price, Packing, Shipping and Discount.
OEM Deep Cycle Lithium Ion Truck Battery 150Ah Telecom Tower Battery
Inquiry Cart
0