Add to Cart
Product:
Name: Floor Slag Remover Ash Removal Machine Concrete Residue Floor
Slag Burnishing Cleaning Machine
Features:
Description:
This Floor Slag Remover Ash Removal Machine Concrete Residue Floor
Slag Burnishing Cleaning Machine offers a range of features to meet
your cleaning needs. With simple operation and high efficiency, it
ensures smooth and effortless cleaning. The machine is designed for
easy maintenance, and its powerful motor allows for easy movement.
This machine is specifically designed for the removal of ground
coatings, paint, and various road markings. It is also ideal for
renovating damaged floors or removing old floor surfaces. With its
superior performance, it guarantees exceptional results, bringing
about a significant transformation in the quality of your floors.
The scarifying machine is equipped with a light motor drive and a
powerful 7.5kw kilowatts Y132M-4 variable speed motor, which serves
as the driving force behind its efficient operation. By utilizing a
forward cutting working principle, this machine can quickly and
efficiently cut through ground materials. Unlike large-scale
milling machines, this small milling machine relies on the positive
high-speed rotation of the milling drum. With its six groups of
hard tungsten steel alloy blades on the milling cutter shaft, it
effectively shakes and breaks down the ground material, achieving a
smooth surface milling effect.
In terms of usage, this concrete scarifier is perfect for a wide
range of applications. Whether you need to remove floor coatings,
paint, road markings, or renovate damaged floors, this machine is
equipped to handle the task with precision and ease.
Invest in our Floor Slag Remover Ash Removal Machine Concrete
Residue Floor Slag Burnishing Cleaning Machine and experience the
professional and efficient cleaning it delivers.
Description:
1 simple operation, high efficiency!
2 with easy maintenance, power, easy to move, and so on
3 to remove the ground coating, paint, and a variety of road
markings;
4 damaged ground, the need for renovation of the plot, removal of
the old floor surface;
5 into the quality of heaven and earth, bring unlimited business
opportunities
scarifying machine is a light motor drive ground milling machine to 7.5kw kilowatts
Y132M-4 variable speed motor as the driving force, the use of
forwarding cutting the working principle can quickly cut the ground
material! Working principle: Unlike the large-scale milling
machine's anti-cutting principle, the small milling machine relies
on the positive high-speed rotation of the milling drum, to shake
the six groups of hard tungsten steel alloy blades on the milling
cutter shaft. , The use of an alloy blade on the tungsten steel
alloy teeth to break and ground the ground material, to achieve the
effect of surface milling;
use:
concrete scarifier machines Mainly used for highways, urban roads, airports, freight yards, and
other asphalt concrete surfaces of the excavation renovation, can
also be used to remove the road package, oil waves, textures,
rutting, and other defects can also be used to excavate pits and
ditch Groove, and the cement road surface of the hair and the
surface of the wrong level of milling.
parameters:
Technical project | model: WC-200G | model WC-255G |
Power Configuration | Three-phase asynchronous motor / 5.5KW (CW200D) Honda GX270 Gasoline Engine / 13HP (WC200F) | Three-phase asynchronous motor / 7.5KW (CW255D) Honda GX270 Gasoline Engine / 13HP (WC255F) |
Number of knife shafts | 6 root | 6 root |
Number of blades | 78 pieces (6 teeth) | 108 pieces (6 teeth) |
Bearing seal form | Sealed (maintenance-free) | Sealed (maintenance-free) |
A milling width | 200mm | 250mm |
A milling depth | 3mm-5mm | 3mm-5mm |
weight | 90kg | 115kg |
Long × wide × high | 1125×500×1125mm | 1125×500×1125mm |
Hourly work efficiency | 150 square | 170 square |
Walking wheel | 4 only | 4 only |
Air damping tube | 2 only | 2pc |
Counterweight | 25kg(standard) |
4. concrete scarifier machine use and maintenance
1 machine is the main part of the work due to the milling cutter,
bearings, gaskets, milling drums, the operation process due to a
long time with the road friction, the fastest consumption is this
part of the regular replacement, inspection to better extend the
use of the machine life;
2, the milling cutter shaft should be checked daily, if the above
grinding out of the slot is more than 25% of the diameter of the
knife, you have to replace it. In general, the life of the knife
shaft is half the life of the tungsten steel cutter. scarifying machine From the square area, the life of the milling depth of 5mm when
about 350-500 square meters. But please pay attention, many factors
will affect the life of the knife shaft, so check every day;
3, for safety reasons, before the maintenance, should first pull
the engine spark plug, preferably by the qualified mechanic;
4, each time before running to check the oil level, after use to
clean the air filter;
5, every 4 hours after use, to grease the bearing. concrete scarifier Hit the grease while playing the side of the rotation drum so that
grease coated the entire bearing;
6, before each operation with the naked eye, check the machine: all
fasteners are tightened? Are there any parts of the obvious wear or
cracking? The oil pipeline is intact? Check the bearings, and check
the cover is covered;
7, before each operation, check the belt tightness. The new belt
should be reoriented after 4 hours of operation, and the belt
tension must be maintained to transmit the output horsepower of the
engine to the cutter drum. scarifier concrete grinder When the tight belt is too tight, the belt will be easily worn and
the bearing life will be shortened, If broken, serious wear and
tear of the belt should immediately change the new; forget the past
to have a new start.
8, in general, milling cutter cracking is very rare, if any,
usually shows the following: a: milling cutter on the irregular
arrangement; b: single milling too deep; c: the use of
inappropriate milling Knife to remove the different types of the
road; d: milling the surface strength is too large; to be the
courage to admit their mistakes, and bear the responsibility.
9, each time you change the milling cutter arrangement, check the
cutter shaft and the bearing. If the shaft appears to wear the
groove, you need to replace the new, one when the axis for the same
time for bearings;
10, milling drum if properly maintained, usually can be used for 3
months. When checking the milling cutter or doing maintenance,
check whether there are any cracks in the center axis of the
milling drum, whether the sleeve hole is oval, whether there is any
crack at the weld, and if there is any damage,
11, and finally, when you want to check the milling machine at the
bottom of the milling machine, reminded that: the machine must be
tilted forward, never backward, or oil will pour into the engine
cylinder.
Model | ZT70 | ZT100 | ZT120 |
Drill Diameter | φ60-80mm | φ83-100mm | φ85~130mm |
Rock hardness | ≥20 | ≥20 | ≥20 |
Drill Depth | ≥15m | ≥30 | 30-40m |
Swing speed | 110r/min | 90r/min | 90r/min |
Air pressure | 0.5-0.7Mpa | 0.5-0.7Mpa | 0.5~1.0Mpa |
Air consumption | ≥3.5m3/min | 6M3/min | 10m3/min |
Cylinder Diameter | 90mm | 90mm | 90mm |
Valid Distance | 1070mm | 1070mm | 1200mm |
Propulsion | 3600N | 6000N | 9600N |
Power | 3kW | 3kW | 3kW |
Voltage | 380V | 380V | 380V |
Rated speed | 1410r/min | 1410r/min | 1410r/min |
Outer Diameter | φ42mm | φ42mm | φ42mm |
Drill Pipe Length | 1025mm | 1025mm | 1025mm |
Size | 1740×260×420mm | 1800*650*400mm | 1800*700*450mm |
Weight | 220kg | 250kg | 300kg |
Concrete Floor Grinder Riding Trowel Machine
Shaanxi Zhongtuo Mining Equipment Co., Ltd. is a global supplier
that specializes in bridge stretching
equipment, downhole drill series, steel processing machinery, rock
splitting equipment, grouting equipment, and pavement processing
equipment. After years of hard work and development. We have
established a
solid foundation for providing quality services with many years of
experience in mechanical equipment
manufacturing. Our high-quality bridge equipment and mining
machinery products such as bridge
stretching equipment, downhole drill series, steel processing
machinery, rock splitting equipment,
grouting equipment, and pavement processing equipment have been
well received by users. In recent years
we have begun to focus on the development of international markets.
?With the continuous improvement of
high-quality products and high-quality services, our products are
highly appreciated by customers in the
international market. Due to the excellent performance of the
products and professional after-sales service, our products have
been sold to Romania, Bulgaria, Albania, Colombia, Brazil, Peru,
Uruguay, Saudi Arabia,
Kuwait, United Arab Emirates, Oman, Turkey, Israel, Kazakhstan,
Sudan, Madagascar, etc. We have been
focusing on high-quality mechanical equipment and construction
products for more than 20 years, and are
widely used in mining, construction and water conservancy projects,
railway
FAQ:
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District,
Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support
according to your needs.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can
be customized according to your requirements.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other
nonstandard electrical items we will deliver within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly
welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free.
You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.