Add to Cart
Auto Flat Die Hydraulic Rebar Processing Machine Screw Rebar Thread Rolling Machine
Introduction of Thread Rolling Machine
Thread rolling machine application ADS-40 dish type steel bar straight thread rolling machine is mainly used for rolling straight thread head of ribbed steel bar in construction engineering. It is the key equipment to realize the straight screw connection of the steel bar. Grade assisted rebar.
Parameters of upset forging machine
Processing of steel range: | φ12-φ40 |
Rated power: | 4kw |
Rated power: | 380V 50HZ |
Hydraulic oil: | 68# anti-wear hydraulic oil |
Maximum working pressure | 80Mpa |
Total machine weight: | 560kg |
Machine size | 1020x500x965mm |
Workflow of Thread rolling machine
1. Debug the machine tool, turn on the power as required, add
coolant to the coolant tank, and then start the thread rolling
machine for the trial operation to see if the cooling system,
control system, etc. are working properly.
2. According to the diameter of the steel bar that needs to be
rolled, install the corresponding rolling wheel and replace the
corresponding washer at the same time to ensure the accuracy of the
thread pitch
3. Clamp the steel bar, install the steel bar to be rolled on the
centering jaw, align the extension length with the end face of the
rolling head stripping blade at the starting position, and clamp
the steel bar. 4. Start the thread rolling machine, turn the moving
handle, start to peel the ribs in the forward rotation, continue to
feed the rolling thread, press the reverse start button after the
thread rolling is completed, and the tool will automatically
retract. After the work, clean the machine tool to keep it clean
and dry, and regularly perform maintenance on the thread rolling
machine such as oil replacement and prop grinding.
How to use HGS-40 thread rolling machine
(1) Preparation before processing
1. Connect the power and ground wires as required, and turn on the
power. The power supply is a three-phase 380V 50Hz AC power supply.
To ensure personal safety, please use an automatic switch with a
leakage protection function.
2. In the coolant tank, add enough soluble coolant (refueling
coolant is strictly prohibited) (2) Test run with an empty car
1. Turn on the power. Check whether the cooling water pump is
working properly.
2. Operate the button to check whether the electrical control
system works normally
Entire Service
We would provide customers with a one-year warranty, during
processing, if customers have any problems with installation and
use, we have professionals to provide online text, voice, or video
communication services for them.