Add to Cart
Floor Grinder Machine Ride On Concrete Finishing Trowel Machine
Description of Concrete Trowel Seat-Driven Machine
Using gasoline power, it is easy to start, and one machine can be
equipped with two discs for ride-on operation. One person can
easily operate it; it is an ideal machine for concrete
construction. The infinitely variable steering is flexible and
convenient, and the working width can reach two meters, which not
only saves labor but also improves construction efficiency. The
surface after machine construction will be smoother and smoother,
and at the same time, the compactness and wear resistance of the
concrete surface can be greatly improved. Ride-on grinder +
single-disc trowel is widely used for slurrying, smoothing, and
troweling concrete surfaces in high-standard workshops, warehouses,
parking lots, squares, airports, and frame buildings.
Parameter of Concrete Trowel Seat-Driven Machine
Model | ZT80L | ZT100L |
Engine type | Honda | Honda |
Power | 9.6(13.0)kw/hp | 17.6(24.0)kw/hp |
Blade/Power | 70-150/3600rpm | 70-150/3600rpm |
working diameter | 1910*1030mm | 1910*1030 |
Disc diameter | 800mm | 100mm |
Blade size | 1260*150mm | 350*150 |
Weight | 260kg | 386kg |
The working principle of Concrete Trowel Seat-Driven Machine:
1. Before starting, check the operating parts of the machine for
abnormal conditions to ensure the reliability of operation;
2. Confirm that the switch of the main brake is in the closed
state, do not step on the accelerator when starting, pull the
damper to start, and return the damper after the machine starts;
3. Start the trowel, and hold the joystick tightly to keep the fuselage balanced;
4. The trowel must be stabilized when the trowel is working, and the direction should be adjusted in time when working on the floor to keep the operation of the machine under control;
5. During the construction process, pay attention to rough grinding first and then fine grinding. After rough grinding the bottom grinding disc, remove the grinding disc when the ground is suitable for fine grinding, and then use a spatula to finely grind it.
The advantages of Concrete Trowel Seat-Driven Machine
1. The walk-behind trowel requires people to hold the machine for
construction, and it is very tiring during the operation. This car
trowel can sit and open, the handle is concentrated, the ergonomic
design is in line with the ergonomic design, and the seat can be
installed. Effectively improve the comfort of work and reduce the
labor intensity of workers.
2. Equipped with a high-horsepower engine, the quality of the
engine is guaranteed, which makes it easier to start the troweling
machine, and greatly improves the efficiency of the finishing and
troweling operation of the equipment. The whole machine runs with
strong power. Stable during light work.
3. Adopting the design of a double trowel, the area of finishing
and troweling operation has been increased, and the efficiency of
harsh construction work has been improved. Equipped with transfer
wheels, it is convenient for workers to move and transfer.
Using a car trowel for construction when finishing and leveling the
concrete floor can bring great convenience to the majority of
workers and reduce their own labor burden.
Maintenance of Concrete Trowel Seat-Driven Machine
In the daily use of the car trowel, attention should be paid to
reasonable and effective maintenance, and regular maintenance and
maintenance will help to maintain the equipment in good operating
condition and can have excellent performance. With proper
maintenance, your trowel will last longer.
1. Check and replace the engine oil of the trowel on a regular
basis to check whether the engine oil is sufficient. If the engine
oil is insufficient, it should be replenished in time. When
replacing the engine oil, be careful not to mix old and new oil to
prevent oil from appearing. spoiled.
2. Add lubricating oil to the bearing parts of the troweling
machine to ensure that the machine can get a good lubrication
effect. Reasonable filling of lubricating oil can reduce the
friction and wear between the various parts, and reduce the
occurrence of the failure rate of the fuselage. Extends the life of
components.
3. Before the construction work of the car trowel, comprehensively
check whether the various parts of the fuselage are properly
connected, and tighten the loose parts according to the specified
gaps to prevent the loose parts from loosening during operation,
and timely repair the aging and severely worn parts. to replace.