Add to Cart
Bw160 Three-Cylinder Piston Triplex Mud Pump For Drilling Rigs
Description of Bw160 Mud Pump
BW160 mud pump is a portable mud pump. The pump is a horizontal triplex reciprocating single-acting piston pump with four flow rates and four pressures, with a wide range of flow and pressure variations. There are many standard parts, light and flexible, and easy to relocate. It can be used for geological exploration and engineering exploration pumps with a hole depth of less than 1000m in railway, water, metallurgy, construction, geology, and other industries.
Technical parameters of Bw Mud Pumps
Model | BW150 | BW160 | BW250 | BW320 |
Cylinder Diameter (mm) | 70 | 70 | 65/80 | 80 |
Stroke (mm) | 70 | 70 | 100 | 110 |
Pump Speed (t/m) | 57-183 | 55-200 | 42-200 | 78-214 |
Flow Rate (l/m) | 38-125 | 44-160 | 35-250 | 118-320 |
Pressure (Mpa) | 2.3-7 | 2.5-10 | 2.5-7 | 2.2-10 |
Outlet Pipe Diameter (mm) | 32 | 32 | 51 | 51 |
Inner Pipe Diameter (mm) | 51 | 51 | 76 | 76 |
Power (kW) | 7.5 | 11 | 15 | 30 |
Size (mm) | 1925*795*1150 (diesel motor) 1840*795*995 (electric motor) | 1450*745*970 | 1560*995*650 | 1905-1100-1200 |
Weight (kg) | 560/630 | 430 | 650 | 720 |
The Pressure of the Mud Pump
The pressure of the pump depends on the depth of the drilling hole, the resistance of flushing fluid (drilling fluid) through the channel, as well as the nature of the conveying drilling fluid. The deeper the drilling hole and the greater the pipeline resistance, the higher the pressure needed.
With the changes in drilling hole diameter and depth, the displacement of the pump can be adjusted accordingly. In the mud pump mechanism, the gearbox or hydraulic motor is equipped to adjust its speed and displacement. In order to accurately measure the changes in pressure and displacement, a flow meter and pressure gauge are installed in the mud pump.
Application of Bw Series Mud Pump
BW series drilling mud pump is widely used in mining, drilling, coal, railway, highway, water conservancy, hydropower, Bridges, high-rise buildings, and foundation reinforcement engineering.
Maintenance of Bw Series Mud Pump
1. Mud pumps and other mechanical equipment should be inspected and maintained on a scheduled and timely basis to find and address problems ahead of time, in order to avoid an unscheduled shutdown. 2. The worker should attend to the size of the sediment particles; if large particles are found, the mud pump parts should be checked frequently for wear, to see if they need to be repaired or replaced. The wearing parts for mud pumps include pump casing, bearings, impeller, piston, liner, etc.
3. Advanced anti-wear measures should be adopted to increase the service life of the wearing parts, which can reduce the investment cost of the project, and improve production efficiency. At the same time, wearing parts and other mud pump parts should be repaired rather than replaced when possible.
Entire Service
We would provide customers with a one-year warranty, during processing, if customers have any problems with installation and use, we have professionals to provide online text, voice, or video communication services for them.