Bronze Indexable Carbide Inserts Smooth Cutting CNC Lathe Insert
Brand Name:cross
Model Number:3PKT1505M-R
Minimum Order Quantity:50
Delivery Time:30 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu Sichuan China
Address:
location:No.407,4th floor,unit2,building 1,401sheng'an street,chengdu high-tech zone,China(Sichuan)pilot free trade zone
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Carbide Inserts 3PKT Lathe Parts Tool Milling Inserts CNC Tools 3PKT1505M-R
Milling Application Tips:
- Check power capability and machine rigidity and ensure that the machine can make the most of the required tool diameter.
- Cutting on the spindle with the shortest possible tool overhang.
- Use the correct tool pitch for cutting to minimize the number of inserts involved in the cut to avoid vibration, while on the other hand, for narrow workpieces or when milling exceeds space, make sure the inserts are adequate.
- In any case, the use of indexable inserts with positive rake grooves provides smooth cutting and lowest power consumption.
- Be sure to use the correct feed per blade to achieve the correct cutting action with the recommended maximum chip thickness.
- Select the correct tool diameter that corresponds to the width of the workpiece.
- Choose the most appropriate lead angle.
- Position and clamp the cutter correctly.
- Climb milling is recommended whenever possible.
- Follow insert maintenance recommendations and monitor tool wear.
- If you need to consider the use of coolant, milling without coolant can generally be done very well.
1. Before installing the tool, first check the wear of the tool. If
there are defects such as broken edge and serious wear, replace the
tool with a new one or use it after repair.
2. Before installation, the relevant surfaces must be cleaned and
wiped, and the burrs on the gasket and orifice must be carefully
removed to prevent the dirt and burrs from affecting the accuracy
of the tool installation position.
3. When clamping the tool with a washer, the two ends of the washer
must be parallel to each other as far as possible. If the milling
cutter is found to be skewed after installation, the washer
position shall be adjusted to minimize the cumulative error of the
washer. Until the milling cutter does not shake after driving.
4. When installing the taper shank milling cutter, the taper
between the milling cutter, the intermediate sleeve and the spindle
must be consistent, and the installation center and the tool center
should be concentric as far as possible.
5. After the tool handle is inserted into the main shaft, the
milling cutter is tensioned with the tensioning screw. It should be
noted that the rotation direction of the milling cutter must be
consistent with the thread direction of the pull rod, so that the
thread of the pull rod and the milling cutter can be connected more
tightly during the rotation, otherwise the milling cutter will be
in danger of falling out.
6. Without affecting the processing, try to make the milling cutter
close to the spindle bearing and the hanger bearing close to the
milling cutter. If the milling cutter is far away from the main
bearing, a hanger bearing should be installed between the main
bearing and the milling cutter.
7. When installing the milling cutter, the key should not be
removed. Because there is no key on the cutter shaft, if the force
is uneven during milling or under the condition of heavy load
cutting, the milling cutter tends to slip. At this time, the cutter
shaft itself bears great radial resistance and resistance, which is
easy to bend the cutter shaft and damage the fixed washer.
8. After the milling cutter is installed, check the relevant
washers and nuts again to prevent loosening. Check the radial
runout or end runout of the milling cutter with a dial indicator to
see if it is within the allowable range.
9. After the cutter shaft is removed, it should be hung on the rack
to prevent the cutter shaft from bending and deformation. In
special cases, when horizontal storage is required, wood chips or
other soft objects shall be padded to prevent scratches and
deformation.
Q&A:
1. who are we?
We are based in Sichuan, China, start from 2019,sell to Eastern
Europe(20.00%),Southeast Asia(20.00%),Mid East(20.00%),Southern
Europe(20.00%),South Asia(20.00%). There are total about 5-10
people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Mechanical equipment and parts,Aluminium alloy products,building
materials,metalware,alloy material
4. why should you buy from us not from other suppliers?
Mechanical equipment and partsAluminium alloy productsbuilding
materialsmetalwarealloy materialHardware productsOnline trading
agentImport and export of goods and technologies
5. what services can we provide?
Accepted Delivery Terms: FOB,FCA；
Accepted Payment Currency:USD,EUR,HKD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union,Cash,Escrow;
Language
Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
Bronze Indexable Carbide Inserts Smooth Cutting CNC Lathe Insert
Inquiry Cart
0