220V 5V LED Driver Power Supply 200W Aluminum Punch Light LED Module Display

5V LED Driver 200W Punch Light LED Module Display Aluminum 50/60Hz Power Supply

Quick Detail:
Indoor type aluminum housing package
AC/DC switching 5V 200W 40A single-switch LED driver
AC input voltage: 170~250VAC
1600V High voltage test, full loading test and old aging test
Constant voltage driver apply for LED display and perforate light
IP20 grade
CE, ETL approvals
3 Years Warranty
Size: 19.8*1.09*5.0CM
Weight: 706g


Description:
Our products are widely used in LED industrial project, communications power, aerospace, industrial control systems, posts communications, medical equipment and other industrial and commercial fields.

All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.

5V Indoor types mainly have three models-200W, 300W, 350W and so on, they are mainly used for LED display, punch light/lamp, LED module and so on.

Specifications:

Notices:
1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).
2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.
3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.
4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.
5. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).
6. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.
7. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)

Other related types list:
S-300W-60A 5V 300W 60A Input voltage:90-130V或170-250V 810g 21.4*11.4*5.0cm
S-350W-70A 5V 350W 70A Input voltage:90-130V或170-250V 825g 21.4*11.4*5.0cm

Applications:
Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.




FAQ
How many kinds of 5V led driver indoor IP20 you produce?
A: There are three models-5V 200W, 5V 300W, 5V 350W and so on.
Do you have CE, ETL approval?
A: Most of products have CE approval, some products have ETL approval.
Can I place a sample order?
A: Yes, sample order is available after full test and before delivery. If big quantity, it maybe need 12-18 working days.
What about the lead time?
A: 3-5 days for Sample, 8-12 working days for mass production.
Which tests do you carry out in your factory?
A: We usually do overload test, 1600V high voltage test and 100% old age test.
6. What is MOQ for led driver?
A: MOQ usually is 100-200pcs except sample order.
7. How do you ship the goods and how long does it take to arrive?
A: We ship by sea, by railway or by sea. If samples, always by express such as FEDEX or DHL etc. It all depends.
8. How about the payment terms?
A: T/T for sample order and small quantity order and L/C for large quantity order.
9. How to start an order with each other?
A: Know your true requirements or application fully, quote based on your requirements and our suggestions, confirms the samples and places deposit for formal order and we arrange the mass production.
10. OEM and ODM is acceptable?
A: Yes. Our cooperation is flexible, OEM or ODM is acceptable.
11: Do you offer warranty period for the products as a part of after sale service?
A: Yes, we offer 3 years warranty for our products after delivery.
12: How to deal with the defectives?
A:
Firstly, our products are produced under strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new goods together with new order for small quantity.
Thirdly, for defective batch products, we will investigate into the true problems happened, find the real reasons and discuss the suitable solution including recall them based on real situation.

The overview of Switching power supply

Switching power supply is a device which use modern power electronics technology to control time ratio of switching tube open and off and maintain a stable output voltage of power supply, switching power supply is generally composed of IC and MOSFET which is controlled through pulse width modulation (PWM) compared with linear power. The cost of switching power supply increases with the increase of output power, but the growth rate is different. Linear power cost is higher than switching power supply at a certain output power point, which is called cost reversal point. With the development and innovation of power electronics technology and switching power supply technology constantly innovating, this cost reversal point is increasingly moving to low output power end, which provides a broad development space for switching power supply.
Switching power high-frequency is the direction of its development, high-frequency will make switching power miniaturization and make switching power into a wider range of applications, especially in the field of high-tech applications, promoting high-tech products miniaturization and portability.

In addition, the development and application of switching power supply are of great significance in energy saving, resource saving and environmental protection.The main power electronic devices used in switching power supply are diode, IGBT and MOSFET.

Shenzhen XingJia xinyuan Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, production and sales of switching power supply from 2009. It chooses the best raw materials, implements the most stringent production and installation process, and continuously develops and launches new products. The products have passed the ISO 9001 certification

Since its inception, we have adhered to the concept of "customer-centered" company, integrity, quality, satisfactory service, the strongest technical support, the best price is my purpose and rely on their own exquisite technology to devote themselves to the research, development and production of switching power supply.

Our company integrates scientific research, production and sales of switching power supply. It has development department, production department and quality inspection department. Each department takes strict responsibility at all levels to make its products occupy a place in the fierce market competition. The company actively carries out and implements the policy of integration of production and marketing, seizes market opportunities, and strives for rapid development and continuous expansion in the fierce market competition, large scale production and independent innovation capability. The product adopts PWM high frequency pulse width modulation technology after mature standardized production, strict 100% on-load aging and high-low voltage impact test, complete test records and other strict process flow. The product is widely used in telecommunications, power, aerospace, industrial control systems, postal communications, medical equipment and other fields, and is a brand deeply trusted by customers.