

Add to Cart
2mm Green IXPE Foam With PE Film For Laminate Floor Noise Reduction
Introduction:
IXPE Foam Underlayment is designed for using under floated
laminate, bamboo and engineered wood floors and is ideal for many
types of subflooring. This underlayment is with a 2 mm thickness
foam layer that provides optimal cushioning, sound absorption, non
allergenic, mold and moisture resistant, and premium closed cell
structure underlayment with attached moisture barrier. It also
coordinates the comfort with your floorings.
Suitable area:
Laminate floor, wood floor, engineered floor, hardwood floor,
floating floor, sub-floors, etc.
Roll Cover: | 18.6m2 |
Roll Width: | 1100mm |
Roll Overlap | 100mm |
Thickness | 2mm |
Moisture Resistance Foil | PE film |
Material: | IXPE |
Antimicrobial: | No |
Moisture Resistant | Yes |
Cushioning: | Yes |
Commercial / Residential: | Residential |
How to Install
Step 1: Clean Your Subfloor
Clean your subfloor using your broom and dustpan so that it is free
of any foreign objects.
Step 2: Roll Out Your Underlayment
Roll your underlayment next to the wall. Start in the corner to
keep it as even as possible across the room.
Step 3: Cut the Section
Once you have your underlayment firmly in place, cut the section
using your scissors or utility knife.
Step 4: Roll Out the Next Section
Roll out the next section with the tape side over the overlapping
film on the previous section.
Step 5: Butt Underlayment
Butt your underlayment sections together so that the tape side is
flush up against the other piece of underlayment and on top of the
overlapping film.
Step 6: Cut Section
Cut the next section of underlayment.