Lixian Horizontal Dynamic Balancing Machine 180-1000R/Min Rustproof

Brand Name:Lixian
Certification:CE, ISO 9001:2015
Model Number:HZ-1600
Minimum Order Quantity:1
Delivery Time:5-8 days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now

Add to Cart

Verified Supplier
Location: Dongguan Guangdong China
Address: ROOM 223,UNIT 2,BUILDING 2,NO.5MHOUJIE DONGYE ROAD,HOUJIE TOWN,DONGGUAN CITY,GUANGDONG PROVINCE.
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Dynamatic Balance Machine- 1600kg Universal Joint Transmission Structure Hard Bearing Balancing Machine


Description

The display part of this product is in the form of a 19-inch LCD screen, which not only has the characteristics of large measurement range, high efficiency, safe and simple operation, and intuitive display, etc., and occupies a leading position in the domestic balancing machine industry. Before the operation, as long as the distance between the two calibration surfaces of the workpiece to be calibrated, the distance between the calibration surface and the support point and the corrected radius data are set, the unbalance of the workpiece and the corresponding phase value can be displayed correctly under one start.


Technical Parameters

ModelHZ-1600
Maximum workpiece mass kg1600
Maximum diameter of workpiece mm2000
Effective distance mm1600
Overall length of bed mm2500
Bearing diameter range mmΦ20~Φ120 Φ120~Φ220
Balance speed r/min180-1000 (Variable frequency stepless speed regulation)
Motor power kW5.5
Universal joint drive shaft torque n.m150

The maximum indicating sensitivity of the electrical measuring box g.mm

Balance speed>760r/min CAS-602

5
Minimum reachable residual unbalance g.mm/kg≤0.5
Unbalance Reduction Rate (URR)≥95%

Standard scope of supply

CompositionContentDescription
1 measuring systemCAS-602 industrial control measuring box computer cabinetParameter input and display of measurement results for different workpieces
1 machine bedcast iron constructionUsed to support the left and right movement of the swing frame, including two T-slots and a drive chain
2 swing racksThe steel structure composition has sufficient rigidity to support the workContains highly sensitive sensors, standard rollers, safety protection frame
2 roller support platesIt is placed on the left end of the bed for power transmissionIncluding motor, spindle and pulley
1 head box transmissionPlaced above the head for transferring workpiecesSelf-made high precision and sufficient transmission torque
1 pay universal jointPlaced on the upper end of the head box bearing seatProvide speed signal and reference position for measuring system, including reference signal sensor, signal cable
1 pair of reference signal deviceA ratchet wrench, keyboard, mouseRatchet wrenches are used for workpiece transmission. Support frame working length adjustment
1 set of random accessories

Product certification

Product packing list

Instruction Manual

IPC mainboard driver

Certificate of Conformity: Indicates that the equipment is manufactured by the enterprise in accordance with the ISO2953 standard and passed the inspection before leaving the factory

Packing List: is a list of all parts and accessories of the device

Instructions for use: technical description of the mechanical and electrical equipment of the equipment, instructions for operation and use, and equipment foundation drawings and installation requirements

1 set of random data

Voltage 3-phase 380 V ±10%

Frequency 50 Hz

Supply power to the equipment, the power is 1.25 times the power of the above motor, the internal connection cable of the equipment is provided randomly, and the external cable is provided by the customer depending on the distance of the installation location.
Using power and cablessilver grayThe basic color tone of the factory, special requirements must be specified in the technical agreement when the subscriber

HZ-602 Industrial Control Measurement System

The measurement system is the core of the balancing machine. This system uses the latest CPU computing chip, and then performs operation to display the measurement data after signal amplification, filtering, and analog-to-digital conversion. At the same time, it also has the output of database, communication data and control signal, including the connection of printer. Human-machine dialogue interface, intuitive and simple operation, suitable for display mode in industrial production environment. After strict multi-level component screening, large-scale electrical circuit manufacturing process, coupled with high and low temperature aging tests, it can be suitable for balancing machines to perform accurate

measurements in different environments.

modelHZ-602
technical parameter

1 Speed range 180-6000r/min

2 Display range 1mg-999KG

3 Measurement time 3S

4 Speed display 0-12000r/min

5 Power supply voltage 220v

Measurement channel

1 sensor 1

2 sensors 2

3 Reference signals

Display method19-inch computer LCD screen display

Precautions

Installation of balancing machine

1. The compressive strength of the foundation concrete is ≥16MP, the foundation uses No. 525 cement, and the secondary grouting uses No. 625 cement.

2. The installation level of the machine is ≤0.2/1000. The machine needs to be grouted twice after adjusting the level. When grouting, it should be fully padded, and the anchor bolts should be tightened after the foundation is completely dry.

3. For details, please refer to the foundation installation drawing of HW-1000 type balancing machine

Computer type Digital type


Purpose

An unbalanced rotor generates a pressure on its supporting structure and the rotor itself during its rotation, and causes vibration. Therefore, the dynamic balance of the rotor is very necessary. The balancing machine is to check the dynamic balance of the rotor in the rotating state. The function of dynamic balance is:

● Improve the quality of the rotor and its components

● Reduce noise

● Reduce vibration

● Improve the trial life of supporting parts (bearings)

● Reduce user discomfort

● Reduce the power consumption of the product


Unbalance amount calculation

Where mper is the allowable unbalance:

M: represents the weight of the rotor, the unit is kg

G: represents the balance accuracy grade of the rotor, the unit is mm/s

r : represents the correction radius of the rotor, the unit is mm

n: represents the speed of the rotor, the unit is rpm.


Annex

The balanced quality grades of commonly used various rigid vermilion drills

Balance quality gradeEper.ω mm/sType of rotor
G 0.40.4Spindle, grinding wheel, motor rotor and gyroscope of precision grinder
G 11

Tape recorder and record player, CD, DVD drive, grinding machine spindle drive and electric cabinet, small armature for special requirements


G 2.52.5

Gas and steam turbines, machine tool drives, special requirements of medium and large motor rotors, computer storage drums or disks, turbine compressor rotors, small armatures that do not meet one of the two conditions of G6.3, turbo-driven pumps


G 6.36.3

Paper machine drums, printing press drums, main turbine gears of merchant ships and marine vessels, high-speed separator drums, fans, fans, blowers, rotor parts of aviation gas turbines, flywheels, pump impellers, machine tools and general machinery, generally medium-sized And large motor rotor (shaft center height of more than 80mm) mass-produced small armatures whose installation conditions are not sensitive to vibrations. Vibration isolation devices are provided, and individual parts of the engine with special requirements. Supercharger rotors.


G 1616

Drive shafts with special requirements (propeller shafts, universal joint drive shafts), parts of grinders, parts of agricultural machinery, individual parts of automobile engines, crankshaft drive parts of six-cylinder and multi-cylinder engines with special requirements, metallurgy, chemical industry, Parts of continuous process machinery in petroleum and other refineries, main turbine gears of ships (merchant ships), centrifugal separator drums


G 4040

Automobile wheels, hubs, rims, wheel assemblies, drive shafts, elastically installed six-cylinder or more high-speed four-stroke (gasoline or diesel) engine crankshaft drive devices, and engine crankshaft drive devices for automobiles, trucks and locomotives.


G 100100

Crankshaft drive device of six-cylinder or more high-speed diesel engine, complete engine (gasoline or diesel) of automobile, truck and locomotive


G 250250

Rigidly mounted high-speed four-cylinder diesel engine crankshaft drive device


G 630630

Rigidly installed crankshaft drive device of large four-stroke engine, elastically installed crankshaft drive device of marine diesel engine


G 16001600

Rigidly mounted crankshaft drive device of large two-stroke engine


G 40004000

Crankshaft drive device of low-speed marine diesel engine with odd number of cylinders rigidly installed


China Lixian Horizontal Dynamic Balancing Machine 180-1000R/Min Rustproof supplier

Lixian Horizontal Dynamic Balancing Machine 180-1000R/Min Rustproof

Inquiry Cart 0