Add to Cart
HFH-40KW High Frequency l Handheld Induction Heating Machine For
Welding, Brazing, Solering
1 Siemens IGBT module and Inverting technologies of third
generation been used; Higher reliability and lower maintenance
cost.
2 100% Duty cycle, continuous working is allowed at maximum power
output.
3 Display of heating power and heating current and oscillating
frequency;
4 Simple to install, Installation can be done by unprofessional
person very easily;
5 Light weight.
6 5M cables Connection with heating head can handle it will not reduce
the power , can heat some workpiece that normal coil can not get it
Paramater:
Type | HFH-40KW |
Work power | 3×380V(415V,440V,480V)50-60HZ |
The range of operating voltage | 340V-430V(370-480)V AC |
Connect Cables with heating head | 5 M |
Output Fluctuating power | 40KW |
Fluctuating frequency | 30-80KHZ |
Max Input Current | 40A |
Timing (Heat time, Retain time , Cool time) | 1-99S |
The flow rate of cooling water | 0.08-0.16 Mpa 9L/Min |
Water temperature protection point | 40℃ |
Duty cycle | 100%(40degree room temperature) |
Weight | 53Kg |
Size | 600*230*480MM |
Pre-sale service:
1. recommend the most suitable machine for customers, according to
their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant
technical standards.
2. Take run test, according to relevant equipment test run
regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee.