4.0ton Hydraulic Mini Steel Tracks Excavator CE Euro5 EPA Approved

CE Euro5 EPA Approved 4.0ton Hydraulic Steel Tracks Mini Excavator

Features: Enclosed and operator-friendly cabin;

Iron Track (not rubber track);

Built-in Air Conditioner (better than normal A/C);

High and low travel speed;

Boom swing;

Operating lights on the top of cab and boom;

Warning light;

Radio;

Small fan;

Mobile phone charging port, etc.

Detail:

1. Special design on separating engine and radiation space, using enhanced cooling fan to increase cooling efficiency

2. Famous brand hydraulic system parts ensure the stable quality.

3. Equipped with double fuel filter to guarantee fuel purity to protect engine

4. Extend hydraulic line for various attachments.

5. Comfort cabin, wide and open sight make operator easy to work.

6. Korean pilot control joystick make your operation easy &joyful

7. Could be widely used in gardening, orchard, farming, basement reconstruction, waste residue carrying in coal washing factory, papermaking factory etc. and could replace 4~5 manpower.

Specifications:

Notices:

1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.

2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.

3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.

4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.

5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.

6. Do not lift materials with buckets.

7. When abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.

8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.

9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.

10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.

FAQ
Q1: Are you original manufacturer?
We are a professional manufacture , we have our own R&D team and sales team, we provide one-stop service.

Q2: What about the warranty time?
1 year or 2000 hours. We shoulder all costs during the warranty period, include the freight. And we also provide after-sales service support andagricultural technical support

Q3: What engine you can offer?
Optional Yanmar, Kubota, Brrigs&Sttraton engine,
Optional US EPA & Euro stage V engine

Q4: How can we ensure quality?
We have quality control sysmterm and also double check supervise team,
The final inspection is always carried out before shipment

Q5: What is your production time or delivery time?
Usually, we make merchandise inventory, if we have the products in stock, the delivery time is 5-10 days after receiving the deposit. If we don't have the products in stock, we will arrange the production right now, the delivery time will be 30-45 days,It depend on the order quantity.

Q6: What is your payment term?
Normally we can worked on T/T and support 30% payment in advanced and the other balance 70% can be paid against COPY B/L.

Q7: Do you support Customized service?
Yes, offer me necessary information, we provide custom-make service to meet different needs of global clients with different budgets.

Q8: Do you offer the accessories ?
Yes, we have many kinds of accessories for your choice and make the mini excavator in a wide usage and more effective.

Q9: How do you pack the machine if buy one unit?
Usually we pack the whole machine with the strong wooden crate.

Q10: What is your MOQ?
We support th small order and our MOQ is 1 unit
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Brief Introduction:

Mini Excavator, Full Energy, You will become a Big Winner!

Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, Scissor elevator, forklift and electric forklift together with other machinery fields. Through these products, our Mini Excavators sell pretty hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customer’s good likes!

And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really hot as well.

All Products have obtained ISO9001, CE, SGS, EPA and TUV Certificated.

Welcome to Qingdao Fullwin Machinery

Established in 2012 | ISO9001, CE, SGS, EPA, TUV Certified | Located in Yantai, Shandong

Qingdao Fullwin Machinery, established in 2012, is a professional company dedicated to exporting high-quality excavators, skid steer loaders, forklifts, and other construction machines.

Our factory, situated in Yantai, Shandong Province, is equipped with advanced technology and manned by a team of over 300 skilled professionals. With a steadfast commitment to excellence, we have earned certifications from ISO9001, CE, SGS, EPA, Euro 5, and TUV, testifying to our dedication to quality and compliance with international standards.

Over the years, we have provided excellent construction and engineering machines to customers worldwide. With a profound understanding of the industry and a spirit of continuous innovation, we have become the preferred partner trusted by many international clients