Hydraulic Pilot Operation 1.5 Tonne Excavator OEM Small Digging Machine

Hydraulic Transmission 1.5T Small Digger Crawler Mini Excavator for Sale

Feature:
1. The easy and convenient operation devices are in line with the new generation human engineering working environment.
2. The engine has the features of strong power, low noise, low emission, low fuel consumption, convenient maintenance, etc. It’s
performance, noise, and emissions are all up to the highest level in Europe.
3. The strengthened crawler enhances the wear resistance of the track effectively and prolongs the service life of the track at the same time,
4. Reasonable hydraulic layout greatly facilitates the inspection and maintenance of the hydraulic system.
5. The precise instrument is the intelligent monitoring housekeeper of the excavator.
6. Simple structure in linear type, easy to install and maintain.
Specifications:

Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.
5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When an abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.
10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.

Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals, and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming, and pile pulling.




Company Brief Introduction:
Mini Excavator, Full Energy, You will become a Big Winner!

Our main hot products include Excavators, Mini Excavators, Electric Excavators, Electric Forklifts, Road Rollers, scissors elevators, forklifts, and electric forklifts together with other machinery fields. Through these products, our Mini Excavators sell pretty hotly! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T, 6T, 10T, 20T, 30T Excavators really win customers’ good likes!
And Also Scissor elevator, like 6 meters, 10 meters, 12 meters really hot as well.
All Products have obtained ISO9001, CE, SGS, EPA, and TUV Certificated.

Welcome to Qingdao Fullwin Machinery

Established in 2012 | ISO9001, CE, SGS, EPA, TUV Certified | Located in Yantai, Shandong

Qingdao Fullwin Machinery, established in 2012, is a professional company dedicated to exporting high-quality excavators, skid steer loaders, forklifts, and other construction machines.

Our factory, situated in Yantai, Shandong Province, is equipped with advanced technology and manned by a team of over 300 skilled professionals. With a steadfast commitment to excellence, we have earned certifications from ISO9001, CE, SGS, EPA, Euro 5, and TUV, testifying to our dedication to quality and compliance with international standards.

Over the years, we have provided excellent construction and engineering machines to customers worldwide. With a profound understanding of the industry and a spirit of continuous innovation, we have become the preferred partner trusted by many international clients