XPG-900 Batch Off Machine Rubber PLC Hanging Type Rubber Sheet Cooling Machine
Brand Name:Beishun
Certification:ISO9001,CE
Model Number:XPG-900
Minimum Order Quantity:1
Delivery Time:45 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Qingdao China
Address:
Add.: No. 338 mingxi road, Huangdao district, Qingdao Postal code: 266400
Supplier`s last login times:
within 48 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
XPG-900 Hanging Type Rubber Sheet Cooling Machine
Applications
The rubber sheet batch off cooler machine is a commonly used
cooling device in the production of rubber products. The production
of tires, cables, rubber hoses and other rubber products is made
much easier when the rubber sheets are cooled using this equipment.
It cools and dries the rubber sheet produced in rubber mixing mills
or rubber sheet presses so that they can be properly stored.
| Model | XPG-600 | XPW-600 | XPG-800 | XPG-900 |
| Type of Construction | Floor Type | Mesh-belt Type | Overhead Type | Overhead Type |
| Max. Rubber Sheet Width(mm) | 600 | 600 | 800 | 900 |
| Rubber Thickness (mm) | 4-10 | 2-12 | 4-10 | 6-12 |
| Temperature of Cooling Rubber Sheet Higher Than Room (℃) | 10 | 10 | 15 | 5 |
| Friction Ratio (m/min) | 3-24 | 3-24 | 3-35 | 4-40 |
| Cooling Fans Number(set) | 12 | 12 | 20 | 18-26 |
This Rubber Sheet Cooling Machine adopts a Hanging Type, with the character of simple and proper structure, flexible
operation, and spacious vacuum.
This Rubber Sheet Cooling Machine is mainly composed of 2 large parts: the main host and the
electrical controlling system. Every main part of the machine host
is all in accordance with the industrial standards, with
high-quality materials, and carefully processed.
The Hanging Type Rubber batch off cooling machine structural
features of the device are as follows:
1. Rubber Sheet Access Device
Front access device’ raising and falling are cylinder control,
using no joint circle conveyor belt and frequency converter to
adjust the transmission speed. The joint device adopts a cylinder
driving pressing roll to press and join the structure.
2. Press Jointed Device
Adopt cylinder driving pressing roll to press joint structure.
3. Printing Device
Through the adjustment of the manual directional control valve
control cylinder printing plate rising or falling, You can get
code, shift, trips, and other printing on the sheets.
4. Dipping Device
This device will dip the rubber sheet which comes from the access
device and at the same time smeared separately. Slurry with cooling
circulatory system.
5. Lifting Device
The lifting device’s function is lifting the rubber sheets getting
over the hanging rods and then putting the rubber sheet on the
rods. It includes a clamping conveyor device, transmission device.
6. Cooling Air Case
Totally enclosed fan cooled, automatic film hang on hanging glue
rod blow-drying and cooling.
7. Cutting Device
Will be cooling film after cutting, the cutting length according to
the customer's requirements
8. Rubber Sheet Hanging & Cooling Zone
This device makes the rubber sheet that is put on the hanging rod
move slowly. When the rubber sheet slowly moving, it will be blown
dry to get the rubber sheet cooled down and dry. The mode of
hanging rod moving is driven by the motor reducer. The hanging
rod’s material is A3 steel pipes welded and conveying speed is
adjustable.
9. Rear Access Device
The rear receiving device can take down the rubber sheets which is
after cooled, through transmission belts and then stacked
mechanically on the pallet. It adopts ring-type conveyor belts
without a joint to transmit and works together with a pressing
roll. The frequency converter adjusts the transmitting of the belt.
10. Rubber Sheet Wagging Device
The rubber wagging device is used to stack after cooled rubber
sheets continuously.
This device is composed of ring-type conveyor belts, roll, tension
device, stand, rubber wagging arm, etc. Rubber wagging device is
cam mode, through motor driving wagging arm to wag rubber sheets to
realize the stacking.
11. Pneumatic System
Purpose: To control the access device, press Jointed Device,
printing device, and the cutting device in each cylinder.
12. Electrical Controlling System
The whole production line all adopts frequency converter
controlling speed to realize no-machine speed adjusting. Install
the integrated controlling system to realize one-button speed
adjustment (knob interlocks), one-button to start, stop, convenient
for worker easy operation.
XPG-900 Batch Off Machine Rubber PLC Hanging Type Rubber Sheet Cooling Machine
Inquiry Cart
0