100HP Air Cooled Screw Compressor Chiller Industrial chemical chiller For Pvc PE PP Pipe Ex

Brand Name:ANGES
Model Number:100HP
Minimum Order Quantity:1
Delivery Time:30 days
Payment Terms:T/T, L/C
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen China
Address: Room 1610,Xinlong Building,Baishilong Community,Minzhi Street,Longhua District,Shenzhen,China
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

100HP Air Cooled Screw Compressor Chiller Industrial chemical chiller 100 Ton Air cooling machine for Pvc PE PP Pipe Extruder.


An extruder is a plastic molding equipment. Mainly used for various extruded plastic products, such as PE, PP, PVC, ABS, etc. The high temperature generated during the production process will cause difficulty in demoulding and slow molding, so a cooling water system (pool, cooling tower, chiller) is required. Takes away heat from the extruder.


Model

Parameter

AGS-100ASH
nominal cooling capacitykcal/h281134
kw326.9
input powerkw107
Max. Running currentA243.9
power supply3PH~380V/50HZ
refrigeranttypeR22
refrigerating circuit1
type of controlthermostatic expansion valve
compressortypesemi-hermetic screw
quantity1
Power89
start-up modeY-△
capacity control0-25-50-75-100
condensertypeair cooled type finned copper tube
cooling air flow (m3/h)105000
power(kw)18
evaporatortypeshell and tube
quantity1
chilled fluid flow (m3/h)56.2
inlet and outlet pipe diameter (inch)4
safety protectioncompressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing
net weightkg2860
Dimensionmm4400*1890*2420

How does the chiller cool the extruder equipment?

  1. The chiller unit can provide extruder equipment (5-30℃) to shorten the cooling time of the extruder product and improve the production capacity and quality of the product.
  2. After receiving the extruder chiller, you need to inject appropriate water into the water tank of the chiller. After the chiller works, the water in the water tank is cooled, and then the low-temperature cooling water is sent through the water pump to the extruder that needs to be cooled.
  3. After the chiller absorbs the heat, the temperature rises and then returns to the water tank.
  4. The water temperature of the chiller can be adjusted according to the requirements (5-35°C) to a certain extent, which has better cooling effect than the pool and cooling tower and saves water resources.

How to choose a chiller for an extruder?

  1. When choosing a chiller, we need to calculate the power of the chiller based on the capacity of the extruder (rubber) per hour, the amount of water used in the water tank per hour, and the return water temperature.
  2. According to the energy saving, we can calculate the power of the chiller. In order to achieve the cooling effect, the chiller is generally selected to be slightly larger to avoid environmental factors affecting the energy efficiency ratio and ensure normal production.
  3. Choice of two cooling methods for the cooler. The customer's factory has a swimming pool or cooling water tower. Water-cooled coolers are more suitable than air-cooled coolers. Water-cooled coolers dissipate heat through the water tower and have higher cooling stability. There is no need to purchase additional cooling water towers; If there is no cooling water tower, the cooling power is small, and the environmental ventilation effect is good, you can choose air cooling.

The benefits of using air-cooled chillers:

  1. No cooling towers.
  2. Better environmental stability-no water wastage.
  3. Low maintenance costs.
  4. Easier to operate and control-tower freezing and tower bypass absent.
  5. Chemical costs avoided.
  6. Water costs avoided, especially in cities.






China 100HP Air Cooled Screw Compressor Chiller Industrial  chemical chiller For Pvc PE PP Pipe Ex supplier

100HP Air Cooled Screw Compressor Chiller Industrial chemical chiller For Pvc PE PP Pipe Ex

Inquiry Cart 0