Pet Ps Food Container Making Machines PLA Biodegradable

PLA Biodegradable Disposable Food Container Making Machin

PLA Biodegradable Disposable Take Out Lunch Box Food Container Making Machine

Machine Line Composition

Sheet Extruder Machine

Blister Thermoforming Machine

Fully Automatic Punching Cutting Machine

Industry Mixer

Side Material Crusher Machine

One Set Of Customized Mold

Fully Automatic Punching Knife

Product Description

Blister machines that can produce products directly from raw material pellets is a thermoforming tools mainly used for food packaging containers.

It is particularly advantageous to make bento lunch box products, which may be the equipment with the least investment, the lowest production cost and the highest production efficiency.

These tools are perfect for making disposable food box tray containers as well as Industrial packaging inner trays.

Our machine is still in continuous improvement, however, the machine is not omnipotent, and this machine cannot replace the traditional high-speed vacuum blister machine and other related models. Its molding principle is the same as that of a blister machine, but industrial packaging products with relatively high appearance requirements may not meet some requirements.

We are among the leading manufacturers, suppliers and exporters of a wide range of vacuum blister Thermoforming machines that are highly appreciated for being reliable and compact. This fully automatic production line is for producing food boxes, trays, bowls, plates and so on.

Automatic Sheet Extrusion and blister forming All in one Integrated machine Production Line

Schematic Diagram of the Process Flow of Sheet Extrusion and Blister Forming All in One Machine

Mechanical structure diagram

Sheet Extrusion Machine

First, prepare the raw material granules needed to make the product.

Granules are then melted and thoroughly mixed in the extruder part of the machine. Then, it comes out of the extruder outlet valve as a paste-like sheet due to high pressure and high temperature. The dough taken out from the colander part of the machine is pressed between the colander rollers and adjusted to the specified thickness. The obtained roll is hardened and the width of the sheet is determined based on the relevant tableware required sheet. The produced roll enters the “roll collector” part of the machine. Finally, the output sheet of the conveyor part is collected as a roll on special rods.

Blister Thermoforming Machine

The blister machine is also called thermoforming machine, Vacuum forming machine. It is a machine that sucks thermoplastic plastic or Bio-based degradable environmentally friendly materials rolls such as PP, PS, PE, EVOH, PBAT, PLA, etc., into various shapes of food containers packaging boxes, bowls, plates, trays, and other products.

Product Track

Conveyor rails on the blister machine, including racks, chains, gears, support rods, limit rods, auxiliary rods, motors, etc.

Punching and Cutting Machine

The punching machine is a kind of mechanical equipment that, after the raw materials are installed, driven by the power mechanism, the punching die acts on the material to complete the punching. The punching machine can perform operations such as sheet processing, stamping, molding, embossing, etc. to force the metal into the mold.

The cutting machine is used for the division and cutting of sheets in all walks of life, it does not need any mold; it is controlled by the system software, and then directly cuts the product, as long as the corresponding parameters are set on the operating platform, the computer The corresponding instructions are transmitted to the cutting machine; the cutting machine will quickly cut according to the accepted design drawings, with high automation procedures and simple operation. It is also the cutting equipment used in our Integrated all-in-one sheet extrusion and blister forming machines.

Crusher Machine (for recycling scrap edge into raw material granules)

The extra sheets obtained from the Blister thermoforming machines enter the crushing recycling machine also called the smash recycle machine grinder or grinding machine at the end of the biodegradable tableware production line. All the remaining sheets are grind and later enter the mixing room. After mixing and pulverizing, the grinded sheets are mixed with corn starch and other additives and again enter the granule making machine, which is the start of a biodegradable tableware production line. As it is clear from this description, the waste of producing biodegradable tableware is zero. Therefore, all raw materials are used in the line by different types of biodegradable machinery.

Scope Of Application

Our machines are suitable for the following materials :

1. Thermoplastics: PP, PS, PE, EVOH, etc.

2. Thermoplastic biodegradable plastics: PBAT and PLA, etc.

3. Bio-based degradable environmentally friendly materials, fully biodegradable plant fiber materials: grain fiber, corn starch, plant straw, rice husk, rice bran, bamboo powder, wood powder, bagasse, etc.

4. Bio-based composite materials, biodegradable plant fiber blend materials: talcum powder, calcium carbonate, etc.

5. Multilayered materials, Mineral-filled materials.

Our machines are not suitable for the following materials : PET, PVC, ABS

Triple Screw One Step Extrusion Blister Forming Integrated Machine Configuration

Auxiliary Equipment (Optional, Available for Purchase on Behalf Of)

Service and Support

Qixing stands behind all the machines and equipment we build with a comprehensive array of service options.

This includes a variety of technical support and unbeatable after-sales services, Let us show you the difference of Qixing.

Pre-sales service : We provide you with Technical Support, a prophase plan, process flow design and manufacturer equipment according to your special demand.

1. Free consultant and project feasibility analysis

2. Product-related information for reference

3. Provide equipment design pattern, installation drawings and production needed information according to the customer's actual conditions.

4. Relevant data about raw materials including marks, technical performance index, requirements, suppliers and reference price, etc.

Sales service: Online support and technical video support, Guidance on common troubleshooting points and precautions Sending technicians to the Jobsite to guide the installation and adjustment, training operators and finishing the check and acceptance together with you.

After-sales service : Supplying technique, building design, instruction, installation and debugging for free.

1. Before delivery, we will enforce equipment operation commissioning and trial production. We can send videos or production samples for confirmation.

2. During equipment commissioning, our technicians will do technical training for customers about theory and practice. Training is available online and we can also appoint technicians to your place for training.

3. After delivery, we can offer on-site installation, commissioning and operator retaining services based on customer demands.

4. All machines including thermoforming blister machine, tableware machine, food container machine, sealing machine, wrap machine, cotton tissue machine, etc. enjoy one year warranty.

5. Under warranty, we will provide the solution the first time, whatever faults the equipment has.

6. Beyond warranty, we only charge at cost for maintenance.

7. Other after-sales services can be handled by further mutual agreement.

Lifelong service : One year warranty to make sure your machine runs constantly. Always offer lifelong service and provide spare parts for the long term.