Name: 4F Cnc Carbide End Mill Stainless Steel For D10 Milling Cutter Tool
Brand: BWIN
Price: 1 USD

China Categories

Home Products Suppliers Selling leads

English

Home /Products /Tools & Hardware /Machining /Milling Cutter /

4F Cnc Carbide End Mill Stainless Steel For D10 Milling Cutter Tool

Brand Name:BWIN

Model Number:Φ6*15*d6*50L

Minimum Order Quantity:1pcs/box

Delivery Time:7 work days

Payment Terms:T/T, Western Union

Place of Origin:China

Contact Now

Add to Cart

Shenzhen Bwin Precision Tools Co., Ltd.

Verified Supplier

Location: Shenzhen China

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area, Shenzhen , China

Supplier`s last login times: within 1 hours

View Contact Details

Product Details Company Profile

Product Details

Cnc Carbide End Mill 4F Roughing Endmill Soild HRC45 D10 Milling Cutter Tool 4 Flutes

Characteristic:

Suitable for rough machining
High processing efficiency
Good chip removal performance
Large chip removal
High metal cutting efficiency

Description:

High hardness and wear resistance: under normal temperature, the cutting materials have enough hardness, can easily cut into the workpiece, has high wear resistance, is not easy to wear, and extends the service life.
Good heat resistance: a lot of heat is generated in the cutting process, especially when the cutting speed is high, the temperature will be higher. The milling cutter material should have good heat resistance, which can not only maintain high hardness under high temperature, but also continue to cut
High strength and good toughness: In the cutting process, the milling cutter should bear a great impact. The milling cutter material has high strength and is not easy to break and damage. The milling cutter is also subject to impact and vibration. The material of the milling cutter has good toughness and is not easy to break.

Applicable processing materials:

Stainless steel, aluminum alloy, die steel, tool steel, carbon steel, alloy steel, cast iron, general iron materials, etc.

Milling parameters:

HRC45 Carbide End Mill				Tool length		fz&v
				Short		1
				Long1		0.9
				Overlength		0.8
				Speciality		0.6
Type			Material	Strength N/mm² Hardness HRC	Cooling
					Air	Dry cutting	Lubricating fluid
P	PI	P1.1	Non alloy structural steel, free cutting structural steel, carburized steel and quenched and tempered steel	<700	√	√	√
		P1.2	quenched and tempered steel	<1200	√	√	√
	P2	P2.1	Alloyed nitrided steel, carburized steel and quenched and tempered steel	<900	√	√	√
		P2.2	Tool steel, bearing steel, spring steel and high-speed steel	<1400	√		√
	P3	P3.1	Tool steel, bearing steel, spring steel and high-speed steel	<900	√	√	√
		P3.2	Tool steel, bearing steel, spring steel and high-speed steel	<1500	√		√

Sloting
Vc (m/min)	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	16	20
112	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
92	0.01	0.017	0.025	0.032	0.038	0.045	0.056	0.065
100	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
72	0.009	0.015	0.022	0.028	0.034	0.04	0.05	0.058
64	0.01	0.018	0.025	0.032	0.039	0.045	0.057	0.066
56	0.009	0.016	0.023	0.029	0.036	0.041	0.052	0.06

Roughing
Vc (m/min)	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	16	20
228	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
208	0.017	0.029	0.042	0.054	0.065	0.071	0.095	0.11
184	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
144	0.015	0.026	0.037	0.048	0.058	0.068	0.085	0.098
132	0.017	0.03	0.042	0.054	0.066	0.077	0.096	0.112
112	0.015	0.027	0.039	0.05	0.060	0.07	0.088	0.102

Finish
Vc m/min	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	14	16	18	20
332	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
272	0.026	0.046	0.066	0.085	0.103	0.12	0.135	0.15	0.162	0.173
304	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
212	0.023	0.041	0.059	0.076	0.092	0.107	0.121	0.134	0.145	0.155
196	0.027	0.047	0.067	0.086	0.104	0.122	0.137	0.152	0.165	0.177
168	0.024	0.043	0.061	0.079	0.095	0.111	0.125	0.139	0.150	0.161

Note:

If the following carbide end mill cannot meet your requirements, we support OEM customized production. The diameter of 0.2mm to 25mm, the total length of 50mm to 200mm, 4F, 5F, 6F, 8F and logo can be customized, including inch size end milling cutter. Please contact us to select or customize non-standard carbide end mill according to your needs.

Specification	Flute Dia(D)	Flute Length (C)	Shank Dia(D)	Overall Length(L)
Φ410d4*50L	4	10	4	50
Φ513d5*50L	5	13	5	50
Φ615d6*50L	6	15	6	50
Φ820d8*60L	8	20	8	60
Φ1025d10*75L	10	25	10	75
Φ1230d12*75L	12	30	12	75
Φ835d8*100L	8	35	8	100
Φ1040d10*100L	10	40	10	100
Φ1245d12*100L	12	45	12	100
Φ1445d14*100L	14	45	14	100
Φ1645d16*100L	16	45	16	100
Φ1845d18*100L	18	45	18	100
Φ2045d20*100L	20	45	20	100

Instructions:

1. Before using the carbide end mill, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the carbide e extends out of the collet, the better. If the tool extends out longer, reduce the speed, feed speed or cutting amount.

3. In case of abnormal vibration or sound during cutting, please reduce the speed and cutting amount until the situation is improved.

4. Spray type and air jet type are preferred for steel cooling, which can improve the use effect of carbide end mill.

5. Note: Not suitable for low speed machines such as rotary table and electric hand drill.

Applications:

Pre-hardened Steel, stainless steel, Die steel, steel plate, Heat-resistant steel,pipe, copper and aluminum, cast iron, Nonferrous Metal, Wood, Plastic,FRP and sO on. General-purpose operation slotting, rilling, profiling.

FAQ

Q1. The tool breaks when cutting in or pulling out the workpiece

The feed rate and cutting depth can be reduced, and the cutting edge length can be shortened to the minimum of the necessary length.

Q2. Tool breaks during normal machining

Reduce the feed rate and cutting depth.

The tool shall be passivated.

Replace the clamp or spring collet.

The tool with high cutting edge number changes the tool with low cutting edge number to improve chip removal and prevent chip blockage.

Replace dry milling with wet milling (using cutting fluid), and use it with vortex tube gun to reduce tool temperature and avoid tool overheating.

If the wet milling fluid supply direction is changed from the front to the oblique rear or transverse top, the coolant flow should be sufficient.

Q3. The tool breaks when the feed direction changes

(1) Use arc interpolation (NC machine tool), or temporarily stop (temporarily) feeding.

(2) Reduce (decrease) the feed before and after the direction change.

(3) Replace the clamp or spring collet.

Q4. Problem: Part of the blade tip breaks

Chamfer the corners with manual grinding.

Change down milling to up milling.

Company Profile

Introduction Of BWIN

SHENZHEN BWIN PRECISION TOOLS(SHENZHEN)CO.,LTD.(hereinafter referred to as BWIN company) is located in Songgang Industrial Zone-Shenzhen City-the largest tungsten carbide products manufacture center in Asia.

BWIN company has advanced production technology, a strong scientific research and development team, modern standard indexable insert production line, CNC turning tool bar production line, overall Carbide end mill production line, PVD coating production line, and established a research and development center integrating scientific research and application research.

BWIN company specializes in providing customers with various marking and non-standard PVD and CVD coatings,high-precision turning, milling, parting, drilling, grooving and indexable thread maching CNC Inserts and cutting tools. and with a variety of processing of materials suitable for finishing,semi-finishing and roughing the corresponding chip-breaking groove. dedicated to providing technical solution for auto parts , machine tools, moulds. aerospace and other industries. The company strives to produce various kinds of cutting tools to meet customer's challenging damands.

BWIN company always adheres to customer-centered and customer-oriented, vigorously promotes technological innovation, vigorously promotes technological innovation, fully implements the quality management system and environmental management system, closely focuses on customer needs, and continuously improves product quality and technical services.

BWIN Company adheres to the principle of "integrity and innovation, mutual benefit and win-win" to create higher value for customers is our constant commitment, BWIN Company sincerely looks forward to cooperating with you!

Product Tags:

tungsten carbide end mill cutting tool tungsten carbide cutting tool tungsten carbide milling cutters

4F Cnc Carbide End Mill Stainless Steel For D10 Milling Cutter Tool

Inquiry Cart 0

Home Products Suppliers About Us Contact Us Help Site Map 公司介绍联系我们

Français Русский язык Español 日本語 Português

China Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0~9