Carbide Lathe Insert Threading 16er 16ir 14W Self Cutting Internal Turning Helicoildal

Quick Detail:

• Seiko production
• Durable
• Sharp edge
• Not easy to stick the knife
• Stable performance
• High finish

Description:

• This carbide lathe insert is made with precision and quality assurance. With the advanced measuring instrument and the full inspection mode, the performance is better and the cutting is more accurate; The blade is equipped with a polishing blade to reduce the machining process and automatically deburr; The cutting edge is passivated and treated evenly. The cutting edge is sharp and not easy to stick. The reasonable groove design ensures the effective discharge of cutting, and the machining surface is smooth.

Specifications:​

Lead Time:

Notice:

• The carbide lathe insert shall not be collided or dropped on the ground and must be handled with care.
• Before installing the carbide lathe insert , the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the carbide lathe insert is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the carbide lathe insert is not used, hang the blade vertically on the dry shelf.

Applications:

Our carbide lathe insert could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following: