China Categories

Home Products Suppliers Selling leads

English

Home /Products /Tools & Hardware /Machining /Milling Cutter /

8mm Carbide End Mill AlTiN Coating 12mm Ball Nose End Mill Aluminium Milling

Brand Name:BWIN

Model Number:R8*32*d16*100L

Minimum Order Quantity:1pcs/box

Delivery Time:7 work days

Payment Terms:T/T, Western Union

Place of Origin:China

Contact Now

Add to Cart

Shenzhen Bwin Precision Tools Co., Ltd.

Verified Supplier

Location: Shenzhen China

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area, Shenzhen , China

Supplier`s last login times: within 1 hours

View Contact Details

Product Details Company Profile

Product Details

8mm 12mm Tungsten Carbide Ball Nose End Mill HRC45 2F Aluminium Milling Cutter Machine

Characteristic:

Ultrafine particle bar
German Walter grinder
Large spiral groove design
Double edge belt design for smooth chip removal
Wear resistant and durable, reduce burrs

Description:

The ball end milling cutter made of ultra-fine particle tungsten steel base material is preferred, which has high wear resistance and strength; High precision grinding technology of imported Walter grinder, not easy to wear, long service life; The five axis grinding machine imported from Germany is used to fully grind the cutting edge, and the tool surface has a mirror effect to improve the surface finish; The chip removal groove is designed to ensure smooth chip removal during processing, which can effectively reduce product cracks and wear. The unique spiral edge angle makes the cutting sharp, wear-resistant and smooth, greatly improving the cutting efficiency.

Milling parameters:

HRC45 Carbide End Mill				Tool length		fz&v
				Short		1
				Long1		0.9
				Overlength		0.8
				Speciality		0.6
Type			Material	Strength N/mm² Hardness HRC	Cooling
					Air	Dry cutting	Lubricating fluid
P	PI	P1.1	Non alloy structural steel, free cutting structural steel, carburized steel and quenched and tempered steel	<700	√	√	√
		P1.2	quenched and tempered steel	<1200	√	√	√
	P2	P2.1	Alloyed nitrided steel, carburized steel and quenched and tempered steel	<900	√	√	√
		P2.2	Tool steel, bearing steel, spring steel and high-speed steel	<1400	√		√
	P3	P3.1	Tool steel, bearing steel, spring steel and high-speed steel	<900	√	√	√
		P3.2	Tool steel, bearing steel, spring steel and high-speed steel	<1500	√		√

Sloting
Vc (m/min)	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	16	20
112	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
92	0.01	0.017	0.025	0.032	0.038	0.045	0.056	0.065
100	0.01	0.018	0.026	0.034	0.041	0.048	0.06	0.069
72	0.009	0.015	0.022	0.028	0.034	0.04	0.05	0.058
64	0.01	0.018	0.025	0.032	0.039	0.045	0.057	0.066
56	0.009	0.016	0.023	0.029	0.036	0.041	0.052	0.06

Roughing
Vc (m/min)	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	16	20
228	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
208	0.017	0.029	0.042	0.054	0.065	0.071	0.095	0.11
184	0.018	0.031	0.045	0.057	0.070	0.081	0.101	0.118
144	0.015	0.026	0.037	0.048	0.058	0.068	0.085	0.098
132	0.017	0.03	0.042	0.054	0.066	0.077	0.096	0.112
112	0.015	0.027	0.039	0.05	0.060	0.07	0.088	0.102

Finish
Vc m/min	fz(mm/Tooth)
	Diameter
	2	4	6	8	10	12	14	16	18	20
332	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
272	0.026	0.046	0.066	0.085	0.103	0.12	0.135	0.15	0.162	0.173
304	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
212	0.023	0.041	0.059	0.076	0.092	0.107	0.121	0.134	0.145	0.155
196	0.027	0.047	0.067	0.086	0.104	0.122	0.137	0.152	0.165	0.177
168	0.024	0.043	0.061	0.079	0.095	0.111	0.125	0.139	0.150	0.161

Note:

If the following carbide end mill cannot meet your requirements, we support OEM customized production. The diameter of 0.2mm to 25mm, the total length of 50mm to 200mm, 4F, 5F, 6F, 8F and logo can be customized, including inch size end milling cutter. Please contact us to select or customize non-standard carbide end mill according to your needs.

Specification	Flute Dia(φ)	Flute Length (C)	Shank Dia(D)	Overall Length(L)
R0.52d4*50L	0.5	2	4	50
R0.753d4*50L	0.75	3	4	50
R14d4*50L	1	4	4	50
R1.255d4*50L	1.25	5	4	50
R1.56d4*50L	1.5	6	4	50
R1.757d4*50L	1.75	7	4	50
R28d4*50L	2	8	4	50
R2.510d5*50L	2.5	10	5	50
R312d6*50L	3	12	6	50
R416d8*60L	4	16	8	60
R520d10*75L	5	20	10	75
R624d12*100L	6	24	12	100
R728d14*150L	7	28	14	150
R832d16*100L	8	32	16	100
R936d18*100L	9	36	18	100
R1040d20*100L	10	40	20	100

Notice:

Minimize the use of tool tips to process workpieces: at the position of the ball head tool tip, the processing linear speed is 0 during actual processing, that is, the tool is not actually cutting, but grinding. In actual processing, the coolant can not be added to the cutting area at all, which further leads to greater cutting heat ratio and reduced tool life.
For straight wall processing, use contour contour processing method: try to reduce the phenomenon of ball end cutter processing downward along the straight wall. Relatively speaking, it is a very good method to process upward along the straight wall, but it is difficult to separate them in actual processing. Let's compare the differences between the two.
Machining straight wall with contour can reduce downward machining. If you can use "cutting from bottom to top", this phenomenon can be avoided. When using "cutting from bottom to top", first consider whether the cutting capacity of the cutter is too large. If there are relatively large residues left at the root of the curved surface after machining above, the cutting capacity of the cutter may be too large. This will not protect the tool but destroy it.
The ball end milling cutter shall pay attention to the processing of deep grooves: when processing deep grooves, the cutter may sink. Because the chip holding groove of the ball end milling cutter is relatively small, it is easy to break the cutter when processing sticky materials (such as red copper) and the feed speed is fast. Therefore, pay attention to chip removal when using ball end cutter for machining.

Applications:

Pre-hardened Steel, stainless steel, Die steel, steel plate, Heat-resistant steel,pipe, copper and aluminum, cast iron, Nonferrous Metal, Wood, Plastic,FRP and sO on. General-purpose operation slotting, rilling, profiling.

Q1. The tool breaks when cutting in or pulling out the workpiece

The feed rate and cutting depth can be reduced, and the cutting edge length can be shortened to the minimum of the necessary length.

Q2. Tool breaks during normal machining

Reduce the feed rate and cutting depth.

The tool shall be passivated.

Replace the clamp or spring collet.

The tool with high cutting edge number changes the tool with low cutting edge number to improve chip removal and prevent chip blockage.

Replace dry milling with wet milling (using cutting fluid), and use it with vortex tube gun to reduce tool temperature and avoid tool overheating.

If the wet milling fluid supply direction is changed from the front to the oblique rear or transverse top, the coolant flow should be sufficient.

Q3. The tool breaks when the feed direction changes

(1) Use arc interpolation (NC machine tool), or temporarily stop (temporarily) feeding.

(2) Reduce (decrease) the feed before and after the direction change.

(3) Replace the clamp or spring collet.

Q4. Problem: Part of the blade tip breaks

Chamfer the corners with manual grinding.

Change down milling to up milling.

Company Profile

Introduction Of BWIN

SHENZHEN BWIN PRECISION TOOLS(SHENZHEN)CO.,LTD.(hereinafter referred to as BWIN company) is located in Songgang Industrial Zone-Shenzhen City-the largest tungsten carbide products manufacture center in Asia.

BWIN company has advanced production technology, a strong scientific research and development team, modern standard indexable insert production line, CNC turning tool bar production line, overall Carbide end mill production line, PVD coating production line, and established a research and development center integrating scientific research and application research.

BWIN company specializes in providing customers with various marking and non-standard PVD and CVD coatings,high-precision turning, milling, parting, drilling, grooving and indexable thread maching CNC Inserts and cutting tools. and with a variety of processing of materials suitable for finishing,semi-finishing and roughing the corresponding chip-breaking groove. dedicated to providing technical solution for auto parts , machine tools, moulds. aerospace and other industries. The company strives to produce various kinds of cutting tools to meet customer's challenging damands.

BWIN company always adheres to customer-centered and customer-oriented, vigorously promotes technological innovation, vigorously promotes technological innovation, fully implements the quality management system and environmental management system, closely focuses on customer needs, and continuously improves product quality and technical services.

BWIN Company adheres to the principle of "integrity and innovation, mutual benefit and win-win" to create higher value for customers is our constant commitment, BWIN Company sincerely looks forward to cooperating with you!

Product Tags:

carbide milling bit carbide milling bits tungsten carbide cutting tips

8mm Carbide End Mill AlTiN Coating 12mm Ball Nose End Mill Aluminium Milling

Inquiry Cart 0

Home Products Suppliers About Us Contact Us Help Site Map 公司介绍联系我们

Français Русский язык Español 日本語 Português

China Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0~9