Mrmn 200 Tungsten Carbide Inserts 6mm Face Grooving Insert In Cast Iron Machine

Quick Detail:

Efficient processing

Durable

Complete specifications

Sharp and wear-resistant

Good stability

Description:

The tungsten carbide inserts is made of superfine cemented carbide raw material, finely ground and sintered at high temperature. The overall impact resistance of the blade is strong, and the blade is not easy to collapse; The blade is coated with Balchas coating process. The blade has excellent toughness and heat resistance, and has small chemical affinity. The chip can be removed smoothly during processing without sticking to the blade, which can improve the processing efficiency and reduce the loss rate of the blade; Reasonable chip removal groove design, with high-precision peripheral grinding to make the blade sharp, continuous/intermittent cutting can be easily handled, smooth chip removal will not produce chip buildup, so that processing is more efficient​.

Specifications:​

Notice:

1.The tungsten carbide inserts shall not be collided or dropped on the ground and must be handled with care.

2.Before installing the carbide blade, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.

3.After installation, it is necessary to confirm whether the central hole of the carbide blade is firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.

4.When using, do not exceed the specified high speed

5.When the cemented carbide blade is not used, hang the blade vertically on the dry shelf.

Applications:

Our tungsten carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ