

Add to Cart
CE certificated,2 years warranty
Performance characteristics:
1.It has a wide range of temperature and humidity regulation, which
can meet various needs of users.
2. It adopts a balanced temperature regulation mode, reach a ideal
temperature environment.it has stable balanced heating to carry out
high-precision and stable temperature control, timer and
overtemperature alarm function.
3.The test chamber has the performance of automatically selecting
the running cold circuit with the set value of temperature. Simple
operation. The equipment has the function of overpressure
protection compressor.
4. big observation window, which is convenient to observe the test
state of the sample
5. The double-layer door seal structure ensures that the energy in
the cavity is not easy to dissipate.
High&low temperature test chamber(WGD series): suitable for
basic environmental regulations to electrical and electronic
products.
Test A: Low temperature test method, Test B: High temperature test
method. Conduct low temperature and high temperature tests on
products. test chamber adopts the most advanced temperature control
mode and balanced temperature regulation mode, so it can
automatically obtain the reliable and accurate test temperature
from high temperature to low temperature or from low temperature to
high temperature.
Environmental chamber(WGD-SJ series): It has a wide range of
temperature and humidity regulation and control to meet the basic
environmental test procedures for electrical and electronic
products. Test A: Low temperature test method, Test B: High
temperature test method.Test C:humidity test method,Test
D:alternative temperature and humidity test method.
Specification:
WS Constant temperature and humidity incubator:
LED large screen display working status at any time monitoring;
adaptive control temperature constant; original imported
temperature sensor to reduce the impact of temperature; high
efficient isolation technology to ensure the consistency of indoor
and outdoor; high security; CE certification.
Stimulate various climatic conditions, especially used in samples
tests, shelf life tests, long-term experiments and cultivation of
plants, seeds and microorganisms.
Suitable for scientific research, pharmaceutical, foodstuff,
materials science, cosmetics, tobacco, microbe, chemical industry,
electronics and other fields.
Product introduction:
●World famous compressor: balanced refrigeration technology, auto
defrost, multiple security system, long time running, environmental
protection, high efficiency and energy saving.
●Auto-defrost function: original rapid heat pump defrost
technology, for continuous operation, effectively prevent frost
because of continuous operation of evaporator.
●Refrigeration effect manual control system: meet customer’s
terrible work environment.
●Imported DuPont SUVA R134 an environmental refrigerant. For
cleaner world, for better work condition.
●To save energy, to reduce the cost.
Technical Parameters:
Technical Parameters | WS Constant Climate Chamber | ||
WS-150 | WS-250 | WS-400 | |
Convection mode | Forced-convection | ||
Control mode | 30 Programmable PID Control System | ||
Sterilization function | — | ||
Temperature range (℃) | 0~65℃ | ||
Humidity range | 40~95%RH | ||
Temp. display resolution(℃) | 0.1 | ||
Temp. fluctuation(℃)(10-40℃) | ±0.5 | ||
Temp. spatial deviation(℃)(10-40℃) | ±1 | ±1.5 | |
Humidity fluctuation(RH) | ±2% | ||
Timing range | 0~99Hour ,Or 0~9999min | ||
Running environment | environment temp.10-30;relative humidity below 70% | ||
Heat insulator | imported environmental protection material | ||
External dimension (mm)(H×W×D) | 1410×650×680 | 1730×650×740 | 1700×745×930 |
Dimension of inner chamber (mm) (H×W×D) | 757×508×389 | 1088×508×449 | 1052×601×639 |
Volume of inner chamber (L) (H×W×D) | 150 | 250 | 400 |
Material of internal surface | SUS304 Interior steel materials | ||
Shelves | 3 | 4 | 4 |
Rated power(W) | 1080 | 1100 | 1350 |
Input voltage | AC220V/50Hz | ||
Net weight (KG) | 107.5 | 136 | 158.5 |
Gross weight (KG) | 133 | 162.5 | 188 |
Package size(mm) (H×W×D) | 1605×760×830 | 1935×760×890 | 1907×815×1090 |